HOW TO UNLOCK THE SECURITY LOCK ON A DT700

Sorry Andrew , no BCM on this vehicle . The Central Security Module is incharge of power door locks . Central Security Module For additional information, refer to Section 419-10 .
The central security module is equipped with a battery back-up which holds the programmed transmitter(s) memory in the event of the vehicle battery disconnection.
Principles of Operations The Door Switch Lock Function When a door lock switch is moved into the lock position or a door lock cylinder is rotated to the lock position, the door lock switch grounds the lock circuit input to the central security module. The central security module then provides 12 volts to one side of the door lock actuators contained in the door latch unit and simultaneously grounds the other side of the door lock actuators. This completes the door lock actuator circuit, causing the door lock actuators to rotate a cam assembly, which then locks the doors.

The Door Switch Unlock Function When a door lock switch is moved into the unlock position, the door lock switch grounds the unlock circuit input to the central security module. The central security module then provides 12 volts to the opposite side (relative to locking the door) of the door lock actuator(s) contained in the door latch unit and simultaneously grounds the other side of the door lock actuator(s). This completes the door lock actuator circuit, causing the door lock actuator(s) to rotate a cam assembly in the opposite direction, which then unlocks the door(s). The 12 volts which the central security module provides to the door lock actuator(s) are provided to each door lock actuator from the individual pins on the central security module connector.

Keyless Entry When a remote transmitter button is depressed, it transmits the appropriate command to the central security module as a radio frequency. The central security module receives the command from the remote transmitter through an antenna, which is incorporated in the central security module.
When the central security module receives a command from the remote transmitter, it then sends the appropriate output to control the desired devices. These outputs devices include:

• The front and rear door lock units.
• Central timer module (CTM).
• The liftgate release motor.
• The right and left side turn signal lamp(s).

The central security module sends a signal to the CTM when courtesy lamp illumination is required.
Computer Operated Locks Each front door lock actuator contains a bipolar motor that controls the lock and unlock linkage. The lock/unlock lever of both front door interior handles use linkage to actuate the lever lock switch located inside each front door lock actuator. Each lever lock switch remains in the unlock position until lock/unlock lever of the interior door handle is moved to the lock position. This action toggles the lever lock switch to the lock position. The central security module uses only one electrical input for both lever lock switches. The central security module cannot determine whether the driver or passenger door lever lock switch was actuated. Therefore, actuating the lock feature from either front door will have the same affect of locking all doors. Actuating the unlock feature will not unlock any other door.
The door lock control switches for both front doors also use only one input to the central security module.
Both rear passenger doors contain a rear door lock actuator that controls only electric lock or unlock of the door. Actuating the lock/unlock lever at either rear passenger door will have no effect on other doors.
The panic feature of the remote transmitter sounds the vehicle horn when the vehicle is not equipped with anti-theft. If the vehicle is equipped with anti-theft feature, a separate horn is sounds for the panic feature.

Does it have keyless entry ?
Power Door Locks
The central security module controls the power door lock and keyless entry system. The lock and unlock operation is carried out by supplying ground to the central security module from the door lock control switch. The normal path of the actuators is to ground through the central security module. The door lock control switch will lock and unlock all doors by grounding the appropriate circuit to the central security module. The central security module then supplies power to the appropriate common actuator circuit to lock or unlock all doors.

Keyless Entry
The keyless entry remote transmitter sends a frequency that is received by the central security module internal antenna. Depending on the frequency received, the central security module will lock all doors or unlock the driver door. If the unlock frequency is received again within five seconds of the first unlock, the central security module will unlock all doors.
If the frequency received is from the panic button, the central security module will cycle ground to the parking lamps and horn. The parking lamps and horn will continue to cycle until the panic button is pressed again or the ignition switch is turned to the RUN position.

What kind of phone lock code do you need?Security lock or network lock
Security lock means try default codes like 12345,00000
If it's network lock,you can unlock your phone by network unlock code.If you need an unlock code visit
WickedUnlock.com

just lift the handset and put password. 0000 is default password.

It Locked to security code or password lock? You can get the master reset code and reset the phone from security lock...It locked to network means use the network unlock code to Unlock the Sim Network lock,Specify the Model and brand?You can get the Network Unlock code and Master reset code at hereUnlocking4free.com and Unlock it or reset it...You can try default code as 0000 or 1234 for Nokia to unlock from security lock ,if not works get the master reset code and reset it.

To Unlock the Phone from security Lock or Network Lock?
It locked to which country,Network?What is brand and Model?
you can Unlock the Phone from Network lock using the Unlock code,You can get the Network Unlock code at here
Unlocking4u.com
and Unlock it,If it locked to password or Security code means get the master reset code there itself and Unlock it from security lock....If the Phone Alcatel and Nokia means you can get the master reset code..

What Lock..Network lock or security lock..?
Security lock means call the service provider and get the Master reset Code and Unlock it...
If it Network lock means get the Unlock code here
http://www.onlinegsmunlock.com/nokia-n95/rs7wp9/ and Unlock the Mobile from Network Lock....

To Unlock the Nokia Mobile from the Security Lock you can use the Master Reset Code,To get the Master Reset You can reach here
http://www.unlocking4u.com/unlocking-services/rs6wp6/ I unlocked my Nokia from Network Lock using the Network Unlock code,I unlocked my Nokia 6600 from the Security Lock using the Master Reset Code........I got that Codes at reliable Cost at
that site ...So You can check Master Reset Code For You Mobile there......To Unlock that Mobile from the Security Lock.

lock application
Lock phone applications:
Find it: s >wSettings > Security
> Lock Application
When prompted, enter the unlock code and
press Ok. Then scroll to the application you
wish to lock and press Change.
change unlock and security codes
Find it: s >wSettings > Security
> New Passwords > Unlock Code or Security Code
control access to location function
Set up a location code to control access to
the Location function (see “AGPS & your
location” on page 59):
Find it: s >wSettings > Security
> New Passwords > Location Code

I DONT WANT THE AUTOMATIC KEYPAD LOCK..BUT I WANT TO KNOW HOW TO MAKE KEYPAD SECURITY CODE SAME AS NOKIA..PLEASE HELP ME..