Samsonite luggage why is there a key hole on our coded combination lock on the samsonite spinner.there is no key suplied?

Luggage manufacturer Samsonite offers a variety of business, personal, travel products and accessories. Many Samsonite pieces such as attaches and other bags include a three-digit, built-in combination lock. When purchased, the locks are set on a factory default combination that you can change as often as you wish.

STEP 1
Turn the number dials to the previously set combination, or to "0-0-0", the factory default combination for Samsonite luggage.

STEP 2
Locate the reset button, usually placed to the side of the combination dials.

STEP 3
Press the reset button and hold it while rotating the number dials to the desired combination. Set this to a sequence easy for you to remember but hard for others to figure out.

STEP 4
Release the reset button after you set the numbers to the new combination.

STEP 5
Test the combination by turning the dials to the new code to open the lock. If the combination does not open the lock, repeat Steps 1 through 4 and test the lock again. If you still can't open the lock, contact Samsonite Customer Service at 800-765-2247.

Start at 000 and go up one number at a time until it opens or reachest 999.. it will take some time. .. good luck.

I'm not sure of this model, but on codelocks there is normally a small hendel on the inside. Put this in a locked position and you may set the code as you wish and then release the hendel to "lock" the code.

Hello sstacy1,

You can follow the steps below to fix your problem on how to reset your 4 dial Samsonite combination lock:

1. Set the dials to 0-0-0. Find the lever or button next to the dials.
   
2. 2If your lock has a lever, lower it and turn the dials to the desired numbers. Return the lever to its starting position.
   
3. 3For locks with a button, push the button towards the dials and turn them to the desired numbers. Release the button.
   
4. 4The lock is now set to the new combination.
   

Read more: How to Reset Samsonite Luggage Combination Locks ' eHow.comhttp://www.ehow.com/how_4761466_reset-samsonite-luggage-combination-locks.html#ixzz157Q4Ap

Hopefully it helps.

Thank you for using fixya

1. Set the dials to 0-0-0. Find the lever or button next to the dials.
   
2. 2If your lock has a lever, lower it and turn the dials to the desired numbers. Return the lever to its starting position.
   
3. 3For locks with a button, push the button towards the dials and turn them to the desired numbers. Release the button.
   
4. 4The lock is now set to the new combination
   

mcdevito75 here, You can try to see any place that sells luggagde in your area for help.

Added: I understand you have tried some steps to clear the combination lock. Check this web page to make sure you have tried all the possible options:
http://traveltips.usatoday.com/reset-samsonite-3digit-builtin-combination-lock-61343.html
(Copy and paste the web address above into your browser to get to the right page.)

Hello, Drjayapanick -

I checked the Samsonite web pages to try to find information for you.

Go to this web page (Contact Us information for Samsonite):
https://shop.samsonite.com/contact-us

On that page you can use the form to send an email regarding repairing the combination lock on your luggage.

Or, you may be able to find a business in Mumbai which sells Samsonite luggage, where you can take your bag to find out where you can have the lock repaired.

file an old key with a small 'L' tip or do the same with a hacksaw blade. The tip should be appx 1/2" x 1/8" with the 'L' on the tip. Try several tip sizes. Spray some oil inside first.