Hi Our office currently is using a prostar 816 plus telephone system. We have a prostar 816 phone and it is having issues. In some ocassions when we receive or send calls the persons who we call hear our voice very low and we also hear the personh low. And also some key # do not work. What do you suggest shoud we consider changing the phones?
SOURCE: Speaker phone light continually blinks
The blinking light on the speaker button means the forward when busy is on. To cancel it- With the handset on-hook dial #12.
Then press your own station number. Then dial # again. The speaker button should stop flickering.
Note: If the SPK button continues to flicker, Forward all is activated. It is the same process as above but use #11 instead of #12
SOURCE: volume on incoming calls too quiet cant hear the person calling
On the side of your phone, where the microSD memory card goes.
Thers a button above it, that clicks up/down. Press it until the volume is the right size for you.
SOURCE: samsung prostar 816 plus system ringing problem
sounds like your having a couple of problems at the same time. the lines only ringing at station 1 is the default setting of the system my guess is that the time and date are also way off if thats the case.
To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #62 the screen should say day ring assn
3) press the line you wish to program
4) press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
5) press # when finished with the line
6) repeat steps 2 through 5 for the remainder of the lines you wish to change
press #when finished.
next, the problem with the cordless not working has to do with the port programming, in default it assigns all ports as multiline sets.
To assign a SLT(single line telephone) port to the system while still in program mode dial #38 the screen should say slt dial type and then 16 0's.
0 = keyset 1=slt set
enter in all 16 digits followed by the # i.e.if your cordless is on port 7 it would look like 0000001000000000 #
lastly the phone that can no lnger recieve calls sounds like the do not disturb or DND has been pressed to stop the alarm from ringing. press the mute/dnd button (light should be off). to cancel an alarm press the ALM/SD button twice and then the hold button.
hope that helps out.
SOURCE: audio problem. When I make/receive calls, other person cannot hear my voice.
This problem I've had myself But it will only solve the problem if your cell uses a sim card. When the sim cards go bad thats whats happens your hear them but they can't hear you or vice-versa.
SOURCE: SciPhone I9
No Big Deal !
with Sciphone there is a repair solution for the problem you mentioned,but it requires a technical skills and equipments at least tork screwdriver and some microphone that you can change and soldering station !
Ready for that ?
or you can contact people at for solution
www.omnia-repair.com
Best Regards
64 views
Usually answered in minutes!
×