Lexmark Z23 Vista driver

Click on this link to take you to the site:

http://www.bioticaindia.com/lexmark-z23.html

Go down the page untill you see a box with an icon of the earth with a green arrow and "Download Lexmark Z23 Driver:" written above it

Click on the icon and your driver will download. Further down the page it makes reference to the driver should be OK for Vista.

Happy printing

yes

Good day!Is your new driver compatible with your Lexmark printer?and is your cartridge had no defect?..try to calibrate the cartridge..look to the manual of the printer..

Regards,

mastergani

Try to google it , or go to your manufacturer's website and ask for a driver there. You can select there whether what OS you are using.

They don't make a Vista driver as it is an old printer but the XP driver might work, just ignore any messages saying it might be incompatible and install the diver, if it doesn't work, uninstall the driver and buy a new printer.
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:285:0:0
Here is a Vista driver link, try it no guarantees though.
http://www.bestdrv.com/lexmark_z23_33_driver_67699.htm

you need the Lexmark z23 driver installed on your computer first. Here is the lexmark website. just download the driver and install it. Once that is done you should be able to chose it when printing.

the following link is for your printer.

http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:285:0:0

Hey there

Click Here for the Lexmark Drivers and Downloads page.

Type in Z23 to the model search box and click Search.

Select your Operating System and follow the prompts.

That should get you going.

Be advised, many of Lexmarks older models are not supported in Vista. So, don't shoot the messenger, OK? Aside from that, if this works for you, please rate.
Mike

According to the Lexmark customer support web site there are no Vista drivers for the Z23. It must be too old now to warrant writting drivers for it.

You need to install driver software first, if you have the disk , install it from disk.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then ifyou get in troubles, followthe instructions below to reset and reinstall drivers:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website, or use the disk and run the install file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

Note:someprinter does not work on Vista, if you do not find any driver downloadfor Vista on your model page, that means your model is not Vistacompatible.

no worries..you can find them here...behind the lexmark logo