Can't get my Bushnell Imagview Model 11-8321 to snap pictures. Reread manual with no success.

Get manual it is programmed to start at that hour.

HAVE YOU CHECKED THE LENS FOR OBSTRUCTION OR BREAKAGE?

There are a hundred reasons why it won't take a picture....therefore, no quick fix. Someone with knowledge needs to examine the camera.

Sounds like you didn't use the "safely remove hardware" function when you took the card out of your computer.

does the counter start to flash?

maybe the deer are turning the the camera off.they are pretty smart .just kidding ,im a minnesota deer hunter,and i have downloaded the manual for this camera,and am currently looking for solutions,as far as formating the card ,you need to know what format first,then using your computer,right click on the card reader in my computer and you should see format,click on that and you should see options for fat 32,ntsc,if it uses other format,may need software,or possibly the camera has the capeability to do it ,still reading the manual,try a test with it in your yard after dark,and monotor it for a couple hours,maybe you will notice something

http://157.254.235.130/public/RCR860.pdf
http://157.254.235.130/public/RCR860_code_list.pdf

These are the Manual and The Codes List!!

Enjoy!!

download this driver

http://www.jjvickers.co.uk/new/digipages/dload.html

worked for me on XP pro sp3

Problem is unit will not work with an SD disk over 512MB. For some reason if the SD Card is 1GB or larger you will receive the message the card needs formatting. Verified this after many hours of trying to get 1 and 2GB cards to work. Used 512MB cards or less and the camera works perfectly. Originally got this info from a tech support facility that does support for Bushnell.

My Imageview ( Bushnell ) won't work with a 1GB SD card but will work with a 512Mb AND it will work with a 256Mb. 512 must be the maximum capacity.....Bushnell fails to mention this in the manual or specifications!!!