Firmware 1.4 - Transcend T.Sonic 650 MP3 Player

Can anyone give me Toshiba e studio 355 firmware file? or a download link?

Here is Samsung F480 Secret Codes

Admin Settings: *#6984125*#
Admin Settings
Internals (sub menu): *#9072641*#
Developer Settings: *#0523#
Camera test mode:
Press *#36287# key string in the dial screen to enter camera test mode -
[1] Auto focus [On]
[2] ISP firmware write
[3] ISP firmware version check

[1] Press the "1" key to disable auto focus. In order to enable auto focus, press the "1" key again.

[2] Press the "2" key to write the ISP (Camera Module) firmware. "ISP firmware write [Please wait]" will be displayed during 2 minutes. Then "ISP firmware write [SUCCESS]" will be displayed when the firmware upload finished.

[3] Press the "3" key to display ISP firmware version.
Latest ISP firmware should be 0x1f4d8723 (found in F480XXHF7)

IMEI : *#06#

Software version : *#1234#

FTA S/w version : *#1111#

Hardware info : *#2222#

F/W and H/W version : *#0206*8376263#

Test menu : *#0*#

battery info : *#0228#

Master Reset : *2767*3855#

GPRS info : *#4777*8665#

Bluetooth ID : *#232337#

LCD Brightness : *#8999*523#

Call List : *#2255#

External Displayl : *#8999*3825523#

Java Status Code : #*536961#

This code has something to do with phone locking. : *#7465625#

try changing the 2.4ghz wireless channel to 1 or 11

Before removing the used print head, be sure to update the printer?s firmware version with the included CD-ROM. An error message will be displayed on the printer?s display when the new print head is installed without updating the version. In this case, re-install the used print head and update the firmware version.

Updating the firmware

1. Turn on the power of the printer. Check that the printer is online.

2. Run the file setup.exe in the FirmUpdate folder in the CD-ROM. [GARO Firmware Update Tool] will be installed.

3. Run [GARO Firmware Update Tool] from Programs in the Start menu.

4. By following the instructions, update the firmware version.

1. Turn on the power of the printer. Check that the printer is online.

2. Select the OS89 folder in the FirmUpdate folder in the CD-ROM, and run [GARO FirmUpdate]. [GARO Firmware Update Tool] will be installed.

3. Run [GARO Firmware Update Tool] from [Applications] - [GARO Firmware Update Tool] folder.

4. By following the instructions, update the firmware version.

1. Turn on the power of the printer. Check that the printer is online.

2. Select the OSX folder in the FirmUpdate folder in the CD-ROM, and run [GARO FirmUpdate].

[GARO Firmware Update Tool] will be installed.

3. Run [GARO Firmware Update Tool] from [Applications] - [GARO Firmware Update Tool] folder.
4. By following the instructions, update the firmware version.
Precautions when updating the firmware version
- Use [GARO Firmware Update Tool] after checking that the printer is online.
- Do not turn off the power of the printer while firmware data is being transferred.
- If the printer?s firmware is already the most recent version, the Status of the target printer will be displayed as ?Update Finished? when using [GARO Firmware Update Tool].

Techbelkin

Need a qualified tech as the firmware is on a secured server that only qualified techs have access to the Firmware is the printer OP system. Companies don't like having their copier op system given out freely.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Sansa e200 series has 3 not interchangeable versions of firmware:

• version 1: e200, firmware starts with v1.xx.xxx
• version 2: e200v2, firmware starts with v3.xx.xxx
• version rhapsody: e200r, firmware starts with v1.xx.xxx

Site for the difference between these versions:
http://kb.sandisk.com/app/answers/detail/a_id/193


The exact type should be on the back of the player: model e280R.
For the rhapsody there is only 1 firmware available.
The zip file can be downloaded here:
http://mp3support.sandisk.com/firmware/rhapsody-1.0.2.165.zip

When another firmware is needed, go to the download firmware wizard on next page and select your model:
http://www.sandisk.com/sandisk-support/driver-download-wizard.aspx

I have a central most site for you to check for the RPC-1 firmware for your Superdrive (below) however, I also have provided a great forum on the RPC-1 firmware made of Mac users who may provide some valuable information for you. I would recommend you view their forum first, then go to the RPC-1 Firmware portal site.

Link:
SuperDrive RPC-1 Firmware Forum

Link:
RPC-1 firmware for Mac drives

If you have more questions regarding this information, don't hesitate to ask.

Regards,

-Mactechtrainer

Firmware Here http://support.gateway.com/support/drivers/getFile.asp?id=19715&dscr=Firmware%20Flash%20Update%20PGS3%20for%20Lite-On%2048x%2024x%2048x%20Recordable/Rewritable%20CD-RW%20Drive&uid=222228034&site=emachines


After you have downloaded the firmware update above,the Firmware flash utility,and the FlashFix and saved them all to the desk top.Run the firmware flash utility in step 1.(and follow the directions) (after you run it and make your back up,move on to step 2), Run flashfix in step 2 (and follow the directions)After you have completed steps 1 and 2 move onto the flash,(just click on the update firware file on you desktop and run it.(follow the directions n the screen)

Note: Firmware flash utility =LtnFw (use it for the backUp)

Step 1: Make a backup copy of your current firmware. You can do so using LtnFW. you should make this backup incase you decide that you want to undo the firmware flash, you will need a backed up firmware.

Note: FlashFix=flash fix

Step 2:The firmware flasher is checking your drive and seeingthat you have an OEM model and is thus refusing to flash it. FlashFix will patch the firmware flasher so that it will agree to flash your drive.
Note: Flash=The firmware file you downloaded

Step 3: After using FlashFix, run the flasher, make sure that you select the correct drive from the drop-down list, and flash


I hope this better explains the steps

Hi,
If the songs you have are DRM protected then you may need to check with the source from where you've downloaded the track. 
Sometimes, if the Music data base on the device is corrupt, even then you may run into such problems.
follow the instructions below to get the sansa firmware updater to make sure that the firmware for your payer is updated automatically:
METHOD 1 - Download and manually update the Sansa m200 

NOTE: The manual update does NOT support firmware version 4.X.XXX. Refer to METHOD 2 if the firmware on your Sansa m200 is either 4.X.XXX. 

WARNING: All data on your Sansa m200 will be deleted during the firmware update. Back up all your data before proceeding. 

STEP 1 - Download the Sansa m200 Firmware Updater .exe file and save it to your desktop. 

STEP 2 - Install the Updater 
1. Double-click the downloaded .exe file (sdmx3-iv001.exe). 
2. Click Next. 
 

3. Click Yes to agree on the license agreement. 
 
  
4. Click Next to start installing the program. 
  

STEP 3 - Connect your player to the PC 
1. Turn off your Sansa m200. 
2. Slide the HOLD switch to the lock position (orange color will show). 
3. Connect the player to the PC. 

STEP 4 - Update the firmware 
1. Click Firmware Upgrade. 
  

WARNING: All data on your Sansa m200 will be deleted during the firmware update. Back up all your data before proceeding. 

2. Click OK to continue the firmware update. 
 

3. Click OK to finish update. 
 

4. Disconnect your Sansa m200 from the PC after the firmware has been successfully downloaded. 
5. Slide the HOLD switch to the unlock position (orange color not showing). 
6. Turn on your Sansa m200 player to check. 



METHOD 2 - Using the Sansa Firmware Updater. 
1. If it's not installed yet, download and install the Sansa Firmware Updater. 
2. Slide the HOLD switch to the lock position (orange color will show). 
3. Connect your Sansa m200 to the PC. 
4a. Assuming there's a new firmware available, the following message will appear on your lower right taskbar. Click on the balloon message. 
 

NOTE: If there's no new firmware available, you won't see a balloon message. 

4b. OPTIONAL: You can also manually run the Sansa Updater from your programs files. Most likely it will be under All Programs > SanDisk > Sansa Updater > Sansa Updater. 
5. Select the Firmware check box. 
 
  
6. Click Download Now. Firmware download starts. 
 
  
WARNING: All data on your Sansa m200 will be deleted during the firmware update. Back up all your data before proceeding. 

7. Click Yes to continue the update. 
8. Click Finish after the firmware has been downloaded. 
 

9. Disconnect your Sansa player from the PC. 
10. An "Upgrading firmware. Please wait..." message will appear on the Sansa m200's display screen.