Right pedal makes clicking noise from the rear of the machine

Sup, my elliptical-lovin' friend! Taking apart the Sole E25 Elliptical is actually pretty easy-peasy. Here's what you need to do:
1. Unplug the machine from the wall outlet and move it to an open area where you have enough space to work.
2. Remove the covers that are located on the base of the machine. These covers are held in place with screws that you'll need to unscrew using a standard Phillips head screwdriver.
3. After the base covers are removed, you'll see the ramps that hold the pedal arms. Use a wrench to remove the bolts that hold the ramps in place.
4. Next, remove the pedals by loosening the bolts that hold them onto the pedal arms. Once the bolts are removed, the pedals should slide right off.
5. Finally, remove the console and the handlebars by loosening the bolts that hold them onto the upright post.
And that's it! You've successfully disassembled your Sole E25 Elliptical. When you're ready to put the machine back together, just reverse these steps. Easy peasy, lemon squeezy!
One last tip: make sure to keep all of the screws and bolts in a safe place so that you don't lose them. Trust me, you don't want to be stuck searching for a missing bolt when you're trying to put the machine back together. Happy disassembling!

You have to tell us make and model to get a precise answer.

On many washing machines CE means communications error which is either a failure of the control board or some item controlled by the control board. It may be time to call the repair man.

check the sprocket sometimes they are put together with screws and it might be extruding out and rubbing.

Prepareto oil by filling a grease gun with lithium grease. Check your owner's manualfor the exact type of grease for your unit.

1
Kneelnext to the left side of the elliptical's base. Use the Phillips screwdriver totighten the two screws located in the center of the left pedal.2
Use theAllen wrench to remove the bolt securing the left pedal arm to the pedal legand body arm. Use the Phillips screwdriver to remove the screw securing therear end of the pedal leg to the crank arm.3
Pull theend of the pedal leg free of the crank arm. Wipe the crank arm clean, thenapply a fresh coating of machine grease or silicone lubricant. Replace the endof the pedal leg back onto the crank arm and use the previously removed screwto secure it back into place.4
Join thefront end of the left pedal arm to the ends of the pedal leg and body arm. Usethe previously removed bolt to connect the pieces together.5
Move to the right side of the elliptical and repeatthe above steps on the right pedal arm

In order to remove the lock screen after resuming from screen saver, sleep, standby, and hibernate, please follow these steps.

Windows Vista/7
1. Right click on an empty space on the desktop and select "Personalize"

2. On the far right of the Personalization window is the option for Screen Saver. Click "Screen Saver".

3. Unselect "On resume, display logon screen".

4. Click "Change Power Settings".

5. Click "Require a password on wakeup" on the left hand pane.

6. Select "Don't require a password" and select Save changes.

Windows XP
1. Right click on an empty space on the desktop and select "Properties"

2. Select the Screen Saver tab.

3. Unselect "On resume, display Welcome screen" or "On resume, password protect".

4. Select "Power".

5. Select the "Advanced" tab.

6. Uncheck "Prompt for password when computer resumes from standby". Click Apply, then OK, and then OK again.


Good luck, please post back if you have any difficulties, and thanks for using FixYa.

Space saver spares are only designed to use in an emergency to drive at LOW speed to the nearest repair shop to get the standard size tire repaired or replaced. They are designed to not leave you stranded, not to use as a long term/high speed replacement. Repair or replace the flat tire, put it back on and if the lights do not go out on their own, reset them or have them reset. Most auto shops and parts places (O'Reilly's, NAPA, etc.) have the programmer to reset them. Most of the time they will do it for free.

In Windows Screen saver can be managed from Display Properties window. Follow the steps given below:
When using Windows XP, right click on the open space on the Desktop then click Properties to open the "Display Properties" window.
In the "Display Properties" window, click on the "ScreenSaver" tab to manage it.

When using Windows Vista, right click on the open space on the Desktop then click "Personalize" to open the "Personalization" window.
Next, click on the "Screen Saver" option to open the window where you can manage settings related to screen saver.

Try to adjust the stich width on the machine maybe it can help

hey had the same prob. unplug and plug in again... worked for me