KITCHEN AID 24 IN UNDERCOUNTER DISHWASHER

I tried this once an it worked. Tech came from Sears an asked where fuse box was. He tripped the breaker for dishwasher. Flipped it back on after 10 seconds. Came to the dishwasher an it was like new again. He said sometimes they need a reset. If that did not work he had to replace the panel. Hope it works for you.

The lock lever on the unit --- that is shaped like a U --- if you have it ---may be bent a little. You can move it to the correct position - usually down a little --and your door will stay closed

You need to replace the squeeze tube on the rinse aid pump

If you are getting a particular code then I could help you find the solution.
However, the full service manual can be purchased for about $10 from here and would have all the codes.

Go to www.applianceart.com

They have many options available for changing the color of your Kitchen Aid dishwasher. They also have designs, textures and stainless steel.

Hi,
Here is a tip that I wrote that will help you with your dishwasher not drainingproblem...

Dishwasher Problems - Water will not drain out

heatman101

in your onwer mannual there is a number call kitchen aid they will walk you through the steps to reset your unit

Yes indeed! If you know the measurements, you can buy a stainless panel from www.applianceart.com cut to any size you would like. THey also have a cheaper "faux" stainless option too. Many colors and designs as well.

kitchen aid mod kud101dl does not clean dishes well. lot of scum on door.

if your unable to unlock the "childlock" by holding down the button, then it woud seem that theres a problem with the user interface itself