ARGOX AS-8150 BARCODE SCANNER MANUAL

User Manual
http://www.honeywellaidc.com/CatalogDocuments/VG1200-UG%20Rev%20E.pdf
Chapter 5
To Add Data Prefix or Suffix

Download the user quick start guide from the following link Argox barcode scanner quickstart guide print it out and follow the instructions.

scan "enable CR suffix" from your manual. You may also have to scan "enable LF suffix", but try it without first.

Scan "enable CR suffix" from your manual

Hi

If you have the user guide then go to the page 48(4.3) there all option available, To clear the perfix and suffix, other wise download the user guide to Click hear

Refer to the User Manual or Programming manual that comes with the scanner. They may not offer an actual paper manual these days and the documentation may be on a compact disc. Either way, obtain the programming documentation and you'll find a section containing nothing but pages of barcodes. Each barcode has specific programming info associated with it. locate the SUFFIX setting for the scanner. You'll usually find a Suffix of (carriage return or Enter). You may be required to scan a barcode to put the scanner in programming mode first... this should be in the first portion of the programming manual.

how can I configura my AS8150 bar code scanner to scan and Tab instead of the present scan and Enter

Download your Argox Scanner AS-8000 driver and manual from the following link.

http://www.argox.com/content.php?sno=0000033&P_ID=34

The use and utilization of this device is apparently very simple. However you can refer to the manual for support.

Yeah, from the manual, scan the following settings:
Scan Suffix
7
0
0
9
Scan Options
<DATA> <SUFFIX>
Enter

It's best to copy the necessary barcodes from the manual at 200% zoom, into a Word document and print it out.