Avaya 1210 IP Deskphone not initializing

http://mtadams.wednet.edu/cms/lib2/WA01001713/Centricity/Domain/48/Avaya%201210%20Phone%20User%20Guide%20%202.pdf

Administering a 1400 Series Digital Deskphone
Perform the following steps for each 1400 Series Digital Deskphone:
1. Log into the Avaya Aura Communication Manager administration interface.
2. Perform one of the following steps:
? If you are adding a new extension and want to assign a specific extension number, use
the add station nnnn command, where nnnn is the new extension you want to assign.
? If you are adding a new extension and want to assign the next available extension
number, use the add station next command.
? If you are installing the 1400 Series Digital Deskphone at an existing extension, use the
change station nnnn command, where nnnn is the existing extension you want to
modify.
The Station screen appears.
3. Perform one of the following steps:
? If you are administering a 1408 telephone, type 2410 in the Type field.
? If you are administering a 1416 telephone, type 2420 in the Type field.
4. In the Port field, type the port address.
5. In the Name field, type the name to associate with this telephone. Administering 1400 Series Digital Deskphones
20 Avaya 1400 Series Digital Deskphones Installation and Maintenance Guide
6. Configure the remaining fields on the Station screen pages. Keep in mind the following
information:
? If you are administering a 1408 telephone, the first eight call appearance/feature buttons
displayed on the Station screen are administered on the 1408 telephone. (Since the 1408
telephone is aliased as a 2410 telephone, the Station screen displays 10 call
appearance/feature buttons.) The remaining buttons displayed on the Station screen are
not administered.
? If you are administering a 1416 telephone, the first 16 call appearance/feature buttons
displayed on the Station screen are administered on the 1416 telephone. (Since the 1416
telephone is aliased as a 2420 telephone, the Station screen displays 20 call
appearance/feature buttons.) The remaining buttons displayed on the Station screen are
not administered.
? If you are administering a 1416 telephone with a DBM32 Button module, the first 16 call
appearance/feature buttons displayed on the Station screen are administered on the
1416 telephone. The remaining eight call appearance/feature buttons displayed on the
Station screen are administered on the first eight buttons of the DBM32 Button module.
The 24 buttons of the EU24 expansion module displayed on the Station screen are
administered for the remaining 24 buttons of the DBM32 Button module.
For more information about administration and features, see:
- Administering Avaya Aura™ Communication Manager, Document Number 03-300509
- Avaya Aura™ Communication Manager Feature Description and Implementation,
Document Number 555-245-205
- Avaya Aura™ Communication Manager Screen Reference, Document Number
03-602878
7. When finished administering this extension, save your changes.

Online Virus Removal 39 99 Online Virus Removal and Online PC Help

Out of curiousity, does your network connection cut out sometimes? A higher bandwidth router may do the trick. Linksys is a brand i trust

The Message Waiting indicator light is typically a notification pushed from your PBX to your phone, as your voicemail does not actually reside on your phone, but rather centrally on your PBX system itself. If you are not always getting MW indications on your phone, it could be an issue with your PBX/Extension configuration. I would check with whomever set up your phone system and have them take a look at the configuration on the PBX for your particular extensions.

Cisco CP-PWR-CUBE

This is what fixed this issue to me:

1. I added the buttons "next", "msg-retr" and "delete-msg"
2. On the IP Phone, press "msg-retr", "next" and then "delete-msg"
3. Do it for every single message to turn off the light
4. Smile!

Cheers from Brasil! =)

Do you have the cord into the headset port on your phone?

That phone is registerring with a server. There is nothing you will be able to do. You need to contact your system administrator

Try busyout the station it might help you

This is caused by the Ring Back when Free feature.

Did you get this fixed. I would double check the firmware files of the phone. And maybe reset it.