Just moved i lost the direction and can not remember how to hook it up

1. REPLACE NEEDLE W/FLAT PART AWAY FROM YOU.
2. MAKE SURE THE TOP THREAD IS PROPERLY THREADED.
3. INSURE BOTTOM BOBBIN IS ROTATING RIGHT DIRECTION. (USUALLY COUNTERCLOCKWISE) ALLOW THREE INCHES OF THREAD PULLED AWAY.
4. HOLD TOP THREAD W/LEFT HAND AND ROTATE HAND WHEEL TOWARDS YOURSELF. DOES IT BRING THE BOBBIN THREAD UP?
5. IF THE BOBBIN CARRIER IS INSTALLED PROPERLY THE HOOK (POINTED OBJECT) UNDER THE BOBBIN SHOULD "HOOK" THE TOP THREAD AND BRING THE THREAD AROUND THE BOBBIN THREAD. THE NEEDLE AND TOP THREAD SHOULD BE PULLING THE BOBBIN THREAD UPWARDS. IF THE HOOK DIDN'T "HOOK" THE NEEDLE THREAD THE PROBLEM IS THE DISTANCE OF THE NEEDLE AND HOOK APART OR THE TIMING. YOU MAY TRY TO MOVE THE NEEDLE TO THE LEFT SIDE AND AGAIN TRY ROTATING THE HAND WHEEL. IF IT DOESN'T WORK THEN TRY TO MOVE THE NEEDLE ALL THE WAY TO THE RIGHT AND ROTATE THE HAND WHEEL. IF IT BRINGS THE BOBBIN THREAD UPWARDS IN EITHER CASE IT WILL SHOW A PROBLEM WITH TIMING. THIS WILL NEED TO BE ADJUSTED BY A PROFESSIONAL.
6. REMEMBER TO PUT ONE DROP OF OIL ON THE RACE TRACK BEFORE YOU PUT THE BOBBIN CARRIER IN.

Go to direct Navigator on remote or functions it will lead you into step by step directions for recording and programming the dvr remember you must hook up a digital tv tuner because the dvr is analog and will not record tv.

http://www.voxxsupport.com/images/User%20Manuals%20-%20FAQ%27s/AW772.pdf

L held = shield
R held = shield
R or L held with direction = dodge
Z + direction = grab
A = attack + corresponding direction
A and direction pushed at the same time = Smash Attack
B+ corresponding direction = special attack
D-Pad = taunt

we called the 800 #

Click Sony Support and download required instruction manual of Sony DSLR-A100

www.devicemanuals.com/guide/VCR/GoVideo/GoVideo-Product-Manual-DVD-VCR-DVR4000-TkRjMU1EQT.html THIS SITE HAS THE COMPLETE MANUAL IN PDF FORM.DOWNLOAD & PRINT.(INSTANT USERS GUIDE!!!!!!)HOPE THIS HELPS

YOU SHOULD HAVE A SUB OUT PUT ON THE BACK OF THE AMP MARKED PRE OUT IF NOT CONNECT THE FRONT LEFT AND RIGHT SPEAKER OUT PUTS TO THE SUB THEN FROM THE SUB TO YOUR SPEAKERS.

HOPE THIS HELPS
CABLE GUY.

Chances are, you can download the manual from the website of the manufacturer. That's probably the smart move. Last thing you want to do is try and do connections without it. That's a quick way to go through more than one.

JD
Digital Advisor

My Unit is locked, I don't know how it happen, How do I unlock the Unit?