Forgot password to login

If you are asking what the default credentials are to log into the admin panel of the router, then the options are below.

Default usernames: admin, Admin, [blank]
Default passwords: admin, password, [blank]

If you are asking for the Wi-Fi password, that is unique to the user who initially set it up. You can reset the router but following the manufacturer instructions and holding the reset button down in the back. This will erase all settings on the router.

Most of the NETGEAR devices, except ReadyNAS products and Fully Managed switches, have the following default username and password:

• Username = admin
• Password = password
• • For older devices, password = 1234

To login to your NETGEAR router administration interface, open the following URL using your web browser -
http://192.168.1.1 or http://192.168.0.1 or http://www.routerlogin.net or http://www.routerlogin.com

Note: The actual URL changes by the product model.
You can sometimes find the login URL and default login information on a sticker on the bottom or back of the router.

just call ur internet com and ask them for ur password they might have it

<span id="ctl00_ctl00_MainColumn_CenterColumn_ThreadSolutions1_Repeater1_ctl00_lblSolution"><span>1.Look at the back of the router and connect your laptop to any one of the 4 grey slots <br />2.In your laptop open IE and in address bar type <span style="font-weight: bold;">192.168.2.1</span><br />3.It will open a belkin router setup <br />4.In the belkin Router page select <span style="font-weight: bold;">SECURITY</span> in the left hand side <br />5.It will ask u a <span style="font-weight: bold;">login Pwd</span> . its <span style="font-weight: bold;">blank</span> Click <span style="font-weight: bold;">submit </span><br />6.In the next page u can see the Security Mode - If it is WEP - KEY 1 will be your PWD<br />7.If the PWD is WPA . The Pre shared key or password PSK will be the PWD . <span>Uncheck Obscure PSK to view the PWD .</span></span></span>

Reset the router and put in a new password, just rememeber you have to cnage it on every wireless device that is going to ask for the new password.

Here is the manual in PDF. Hold the reset button for 20 seconds and wait for it to come back up. Then punch in the default login credentials from Belkin (the handbook will tell you how)

Good Luck!

Jesse

Sorry ,
The Password Will Be Saved in the Router
You May need to contact Router Vendor
And let me know if they gave you the Password

I had this with Bt Internet and this exact same router, you have to phone Belkin up and they give you a complete set of new settings that you manually have to put in during setup. If i remember rightly its a free phone number and the operator who answered spoke semi-english so not all bad, hope this helps.

Chris E

What is the brand of the router your using? This information will be from the router that you have. Use a wired connection from the router,check your default gateway (ipconfig) and type that numbers in your address bar. You will be able to access your set-up page, look for wireless tab and look for wireless security. You will see there your WEP key.

I don't know the model of your router this would be very helpful. Most routers have a reset button on the back of the router. This will reset your router back to factory default settings.This will reset the pasword to default usually "admin". You will need to set up your router all over again. Let me know the model and I can send you a link for installation of your router.