20 Most Recent Belkin N1 Wireless USB 2.0 Network Adapter (S6359026) Questions & Answers

F5D4075 uses Homeplug AV standard and F5D4071 used Home plug 1.0 Turbo. Both are not compatible to each other. So if you form a network, you have to form with the same standard.
Secondly, You need just one Powerline adapter on the router and you can have 2 or 3 adapter connected to 1 computer each and all these computers can connect to the 1 adapter on the router. You do not have to use it in pairs

Sounds like the driver is misbehaving. Try downloading the latest driver from Belkin and reinstalling.

Most of the NETGEAR devices, except ReadyNAS products and Fully Managed switches, have the following default username and password:

• Username = admin
• Password = password
• • For older devices, password = 1234

To login to your NETGEAR router administration interface, open the following URL using your web browser - http://192.168.1.1 or http://192.168.0.1 or http://www.routerlogin.net or http://www.routerlogin.com Note: The actual URL changes by the product model. You can sometimes find the login URL and default login information on a sticker on the bottom or back of the router.

you must instal the driver before you conect the wifi to the computer

HI,

You cannot use this wireless adapter in any blueray player, because the drivers which comes along with that adapter cannot be installed in any gaming devices, it can be installed only in computers which has the Operating stytem installed.

Thanks & Regards,
Prema.

if you use mozilla go to tools, then options then security then saved passwords click show passwords.

Hi bobbie ....

I got your issue ...

I think your adapter is not getting installed with the cd

So please go to this link www.belkin.com/support

Thanks.......
With regards ...
Priya

Universally Unique Identifier (UUID) is an identifier standard used in software construction,

I think your network is secured by a partivular uuid whose duty is to secure from external devices


Just disable the firewall and try again

Thanks ....
With regards..
Priya

Hi i got your issue ....

Belkin N1 wireless usb 2.0 network adaptoe does not support windows 7.....hpoefully the drivers for windows 7 are to be released soon....

For further clarifications about the releasing date....
Contact 24/7 belkin support 1800-2235546

Thanks ......
With regards ...
Priya

You need iolo system mechanic(not the one with antivirus) just system mechanic from iolo.com.If this fails to fix your missing shortcut,try "tuneup utilities".You can get this at pc world or staples or office supply units.

The WEP Key will be in the router not in the adapter
If you are not sure about the WEp key then contact your router vendor

Either call Belkin or your ISP or hard reset the router and then configure your network again.

you can visit a cyber cafe where they will download the usb drive for you

if unable to install then go to the URL www.belkin.com/support
in this site click on network adapter
it will ask u for the model number and version of the adapter
then download the right version of ur adapter or else it wont work

the work of a belkin adapter is to receive the wireless signal in and around the adapter when pluged into computer
if ur able to see the wireless network then ur adapter is working fine
check the ip as
start>control panel>network connection>rite click on wireless network>click properties>choose internet protocol tcp/ip (highlight it and click on properties) then "obtain ip address has to be checked"

then cllick OK and try going online --- u must access the internet