Bluetooth Code In looking for the bluetooth code for viper bluetooth helmet S-101 tryed 0000 doesnt work ? can you help please ?

The code will be on the booklet the came with the box

Consult user manual for how to put device into pair mode, then search under bluetooth settings on ps3 if prompted enter pin code 0000. If this does not work consult usuer manual for how to do a reset on the device, it should then automatically go into pair mode. From there search and pair.

Rylan

The pin code for is 0000, you need to put the device into pair mode prior to entering it in your bluetooth menu. To put the device into pair mode, with the S1 off hold the green button down until you see a red/blue flash. When see that flash, enter the pin code when prompted and it should work.

Rylan

dnt no wht code 4 my viper v200 helment can u help

Bluetooth on the LG Shine is almost impossible to recieve connections from. First try listing the steps you tried to take to get your bluetooth working, then ill look back on FixYa and I'll try to help you depending on what level of tech spec problems you are in. Reply

1. First go to your setting module
2. Choose bluetooth in the menu
3. Turn bluetooth on
4. Choose a device (exp. headset, laptop, desktop, cell phone with bluetooth etc.)
5. Switch device on
6. Search for compatable devices on both things you are trying to connect
7. If headset, only search on phone
8. The model number or set name for the device should appear
9. Choose name or model ( If first time using device apply 0000 or 00000 for access code)
10. Test device connectivity and enjoy if works
11. If this does'nt work, consult an LG technical assitance line

Go into control panel, click on bluetooth icon. Tick box 'allow bluetooth devices to find this computor.

Switch on bluetooth on phone and search for new devices. Message on computor, a device is trying to connect. click on message enter code, 0000. enter same code on phone when prompted (be quick).

Start LG pc suite, connection wizard, click bluetooth then next, enter code 0000 when prompted.

Look at phone enter same code, 0000, when prompted and hey presto all will work.

Hope this helps

Regards

Max

Put your Nokia Bluetooth BH 101 into pairing mode - this is normally done by pressing and holding the power key for several seconds. An alternate bleep will sound with a flash light to indicate that you are in pairing mode.

Now using your Cookie, press Menu > Settings > Bluetooth > Search

Your Cookie will find the Nokia BH101 bluetooth headset and then it will ask for a pass code. This is usually four zeros (0000).

You should now be connected!

try the code 0000 or if that doesnt work create your own code. your phone doesnt knw the diffrence

Passkey is 0000

open bluetooth and search for new device,when you find new device you can configure it so as no code is required and pair auto