Where can I get replacement ear cushions for the Motorola H12?!?!

Hi.
I'll really advise you to perform a FDR on the bluetooth. You will need to Press and hold the Call button while turning on the headset to turn on Reset to factory default. Follow the voice prompts to make changes to the settings.

You can find this information on the Link How do reset my FINITI to factory default

Hope it helps.

Marge
Motorola Mobility.

yes sir

The replacements look like they are back in stock, but at $10 you should just buy a new H12 from newegg for $20.

Went to Motorola store and typed in h12 - see link below (if it works):

http://www.store.motorola.com/mot/en/US/adirect/motorola?cmd=catProductDetail&productID=SYN2467A&showAddButton=true&prevSortCriteria=sortByScore&searchMaxCost=null&descSearch=h12&showImage=false&currPageNum=0&filterDispName=-1&domProductQueryName=h12&DispStyle=B2CStyleCategory&refinementOption=true&refinementOption=true&catKey=-1&myFilterType=1&myFilterType=1&dispColNum=1&dispColNum=1&numberSelected=0&MessageType=catDisplayStyle&MessageType=catDisplayStyle&OP=newSearch&FormName=query&FormName=query&filterModuleName=Narrow+By&filterModuleName=Narrow+By&showAll2ndLink=false&sortAscending=true&motoListType=catalog&motoListType=catalog&refineTerm=false&sortCriteria=sortByScore

http://www.store.motorola.com/mot/en/US/adirect/motorola?cmd=catDisplayStyle

Now out of stock, but are in/out. Keep checking.

turn your bluetooth on and on your phone go to bluetooh or settings(if not under bluetooth) and select trusted devices or pair devices, then on the left or right corner it will say (search) once you have found your bluetooth it will say(motopure h12) select and then it will say pair device and you put in the code that came and your instructions and your good to go.

As the headset is repeatedly charged, the pins on the charger starts to not reach the blue tooth ear piece to charge. I clean the dust around the edges on the contact area and was able to get it to charge

My H12 manual has the passcode as 4 zero's for most phones.

to my knowledge the phone will tell you you have some back ground action on the bluetooth and i dont belive it has that feature

I just kepted trying the 0000 and it finally worked. Thanks for trying to help me. Debra

I successfully paired my bluetooth by going into the connection phase, just using my common sense on what to do next once I turned the bluetooth on. Since it was not paired to anything, it automatically went into pairing mode. Thanks anyway!