We have a frigidaire microwave and in the middle of cooking, the motor stopped. The clock and cook time continued to work, but no heat. We've tried using at half power, on defrost, etc. but nothing seems to work

My microwave is doing this as well; It's a frigidaire model #FGMV154CLFA.

After using the microwave part (it is also convection), the light stays on in the microwave and the turner keeps turning.

And I've only used the convection part of my microwave a couple times and I'm not sure if I was successful. While trying to cook something in convection mode, I pressed convection, then pressed the temp i wanted, then convection, then keyed in the time I wanted the item to cook. The microwave started and the timer started counting down but the countdown stopped with 8 minutes left? I left it alone to see what would happen and it never finished so I restarted the process again.

PS..I've never gotten an error code

I am having the exact same problem with mine. I hope someone may have a solution.

Burnt wires or connections at or bad door switch.

Hi,
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

my microwave oven just stopped heating giving me a f9 error .lights are on clock is working and the panel is ok.

The simplies is the fuse, which is located inside the unit, you need a screwdriver to open it

you need to buy a new one because it is broken.

That's how it would sound if you were cooking on a power level less than full power.

If you enter the cooking time and hit Start, it should cook at full power by default and not cycle like you describe.

If you are using some sensor cook setting or automatic type cooking setting, it may cycle like that normally.

The first thing to try is a "hard reset". Unplug it from the power line for a minute, plug it back in, set the clock, then try again.

Let us know if the hard reset doesn't fix it.

If you don't have your manual, you can download it free here. Check the lower right area to enter your model. number.

We're happy to help and we appreciate your thoughtful rating of our answer.

was there any motor that should run as you turn it on, the fan inside and the rotating table motor. try to replace that micro switch at the door that bubbled out and burnt. try to test or replaced right away the industrial diode that is connected from the capacitor to the ground of the microwave.