Frigidaire Microwave Ovens - Recent Questions, Troubleshooting & Support
The control board probably has failed.
Frigidaire...
•
Answered
on Mar 12, 2021
Could be magnetron failure (shorted)
Frigidaire...
•
Answered
on Nov 08, 2020
The outside cover has to be removed to get access to the internal fuse.
Frigidaire...
•
Answered
on Nov 08, 2020
Its the transformer I just had two with the exact same failure . No sound when hitting start just popping the house breaker and blowing the internal fuse. I thought the same as the rest that it was the capacitor because that is usually the suspected component but nope not on the frigidair ffmv164lsa and also on the kenmore 79080323310 made by frigidair with the same parts inside. Same Mag cap and diode same transformer both had a shorted to ground transformer!!
Frigidaire...
•
Answered
on Dec 05, 2019
I realize this is 2 years old, but all you do is hold down stop/cancel for 3 seconds. That also turns on child lock.
Frigidaire...
•
Answered
on Oct 25, 2019
Microwaves are trapped within the oven cavity and do not enter the area outside of it. Metal reflects microwaves as does the mesh across the oven door. You can buy a strip of adhesive foam of reasonable density from your local hardware store which will serve the purpose.
Frigidaire...
•
Answered
on Oct 18, 2019
Did you look in the manual?https://tweakbox.mobi/ https://wordcounter.onl/ https://tutuappx.com/
Frigidaire...
•
Answered
on Sep 08, 2019
Good Morning Friend,
I understand the door will not latch on your Frigidaire microwave, model# FGMV174KFB. Typically, this would not be a do it yourself repair, as you are working with your microwave, and there are no step by step repair instructions. I suggest contacting your local authorized technician for further assistance. They have been trained on your appliance and should be able to fix the latch on your door with ease. Hope this is helpful.
-Best Regards-
WP
Frigidaire...
•
Answered
on Sep 01, 2019
In my limited experience magnetron failure is common but testing is not easy or safe.
Anyone reasonably competent can check that mains power is feeding the primary of the big transformer but unless you have eht test equipment and some training your testing should stop there and hand it over to an accredited repairer.
The voltage and current on the high voltage side of the transformer is potentially lethal and far exceeds the capacity of equipment available to the handyman..
Frigidaire...
•
Answered
on Aug 16, 2019
the turn table is connected in the wiring with no on and off switch
Frigidaire...
•
Answered
on Jul 16, 2019
The only way to stop the beeping is to push the cancel button then immediately open the door. This is the only microwave Ive ever encountered that doesn't stop the beeping when you either open the door or push the cancel button. To make it even more irritating, the beeps are VERY loud and long. Here is a short you tube video posted by someone who recorded this loud and long beeping I am referring to. https://youtu.be/pDq7LTpPNTY
Frigidaire...
•
Answered
on Jul 08, 2019
You have a shorted door switch or a loose, misaligned, or broken door switch mount. It's probably the top or bottom door switch, not the middle one.
Frigidaire...
•
Answered
on Jun 30, 2019
need to test unit for short
Frigidaire...
•
Answered
on Jun 30, 2019
www.repairclinic.com will show the breakdown and replacement instructions and will carry the parts needed.
Frigidaire...
•
Answered
on Jun 30, 2019
You might have a bad or overloaded breaker, Did you try plugging it in another plug?
Frigidaire...
•
Answered
on Jun 30, 2019
Thank you for your post, Steve Shaw!
From what you have described it sounds like a possible faulty wiring harness, control panel, or magnetron within your Frigidaire microwave. I would recommend having a professional out to provide a proper diagnosis. This will help to avoid unnecessary part purchases. -Matt
Frigidaire...
•
Answered
on May 14, 2019
We have three service manuals covering the PLMV169 series, which you can download free:
http://www.microwavedisplay.com/plmv169dcc_sm.pdfhttp://www.microwavedisplay.com/glmv169_plmv169_sm.pdfhttp://www.microwavedisplay.com/glmv169_plmv169_late_prod_sm.pdfThey're all pretty similar.You can usually find parts from
the Pros here.If not, contact Electrolux at the phone number on the front of the service manual.It may be the C/T fuse (thermal fuse located above the magnetron) or the oven cavity thermal cutout, located on the top of the cavity.
Accessing these two parts for testing and possible replacement will require you to remove the oven from the wall.
If
so, the installation instructions are very handy, and it's best to have
two people since the microwave can be heavy and awkward.
You can
download Electrolux / Frigidaire owner's manuals and installation
instructions here.It may also be that there was a power surge which damaged the control circuit board, activating the built-in surge protection.This is not resettable. The circuit board has to be repaired. We do that for $39.95, details
here.
We're
happy to help you with free
advice and we'd appreciate your thoughtful rating of our answer.
Frigidaire...
•
Answered
on May 05, 2019
Not finding what you are looking for?
