F&u MPF3460H digital receiver code - Universal Remote Control URC-6131N Remote Control

www.rcaaudiovideo.com/.../?sku=&productType=Digital+TV+Converter+Box remote control codes

http://www.rcaaudiovideo.com/remote-code-finder/?sku=&productType=Digital+TV+Converter+Box here is what you need

ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000


Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved


If For puk & pin cod problem So Please
Very Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office oprator
Enter The Puk code and Yes
Enter The pin code and Yes
So Puk code Open and Problem will Quickly Solved

Hello
Sony RM-AV3100 remote has no codes to setup with any Integra devices. You have to try its code search method. Sometimes you may find a code. But not sure. Go to the user manaul of that remote. There is proceedings for code search process. The codes are four digits indeed. OK.

These codes may work:

Depending on the comcast model remote you have: Some require the full 5 digit code while others only use the last four digits.

Codes for Kenwood receivers:

31313 31571 30027 31007

Most Direct, Comcast and COX remotes use the same basic codes either with or without the first digit which is always a 0,1, 2, or 3. (0 for cable boxes, 1 for TVs, 2 for DVDs, 3 for audio amps and receivers)

Hope this helps.

Hi,
Here are some remote codes for Kenwood Receivers.
The codes are as follows: One of them should work
0027, 0077, 0313, 0186, 0314, 0356

Here is a link to a web site that has universal codes for remotes.
http://www.hifi-remote.com/ofa/codes-amp.shtml#amp

Hope this helps,
Best Regards,
Mark

You ned change a couple of resistors of 10 ohms at 5 watts near the digital board (Optical inputs)

I located the list of TV Codes and was able to program my TV with my RCA Universal Remote. Thank you for your concern.

hi
menu > settings > security > change lock code > apply master code in place of lock code and press ok > enter new code what you want