Need pin for plantronic bluetooth

The only accessories available for the Explorer 330 are the power adapters, not the things you mentioned. If you need a new bluetooth, check out the latest headsets at this link:

Plantronics Bluetooth Headsets

Good luck from Headsets Direct!

Theoretically they should work together; the Plantronics Explorer 240 is a 2.0 bluetooth and the phone you have is a 2.1. It may come up as a generic headset. Here is a link to the Explorer 230 User Guide. I hope it helps.

Good luck from Headsets Direct!

There are no replacement earbuds for Plantronics Voyager 520. You would need to replace the headset if the earbuds are making it uncomfortable enough that the headset is unusable. Link to Headsets Direct Bluetooth Headsets is included below.

Plantronics Bluetooth Headsets

Good luck from Headsets Direct!

The generic PIN (Which is what I'm guessing you need) for most bluetooth devices is either 0000, or 1234. Please try those and see if that solves your problem.

When joining (or pairing) a Plantronics bluetooth headset to another device a lot depends on the other device. Assuming that you know the necessary steps of your phone, PC or other device for connecting a bluetooth device, all Plantronics headsets pretty much follow a set pairing procedure for connectivity. This one is for the Discovery 975:

1 Turn on the Bluetooth feature on your phone.
2 Turn the earpiece on. Press and hold the call control button until the indicator flashes red/white.
3 Use the commands on your other device to locate and select your earpiece. 9xx Plantronics.
4 If prompted for the PIN code or Passkey, enter 0000.

Pairing is successful when the indicator on your earpiece flashes white.

Note If your phone supports Secure Simple Pairing (SSP), you will not need to enter a PIN code or Passkey.

Good luck from Headsets Direct!

Start with the device off but fully charged. Press and hold the call control button for 8 seconds; at this point, you'll see the light flash blue then red. You'll have two minutes to connect it to your new phone. Use the passkey 0000 after your phone finds the headset.

Begin with Headset turned off. Press button for 6 sec. Release button when Light Indicator flashes blue and red. Headset is ready to pair with Bluetooth device. Use your device?s menu to enter pairing mode and select ?320 Plantronics? on the display. When asked for passkey, enter ?0000.?

to pair your Plantronics headset with your phone. Enable blue tooth on phone, push power button on headset and hold (make it flash between blue and red). You then have 2 or 3 minutes to type in the 0000 passcode to sink them. It really does work (tech support from Plantronics told me how to do this).

That is the job of the ear piece to keep the device in the ear

i need a passcode for my bluetooth so i can put it on my blackjack