Questions & Answers for: who input

Ad

Question about Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

HDTV Sharp- Input select to watch Cable tv Trying to watch tv, snowy screen, no picture. TV will not allow to select INput 1,2,or 3 to watch it. I've read the manual and it says to select Input select

Ad

Question about 51F510 51" Rear Projection HDTV-Ready Television

2 Answers

51F510 Input settings for HDMI All the devices I wish to hook up are HDMI. I would like to know how to set the inputs so I can use Input 1 Input 2 and so forth. Setting HDMI port on input 1. DVI on ...

Ad

...589 and direct tv How do I connect direct tv to denon 589 and then to rca tv If the RCA TV has HDMI input connect as follows: 1. Connect an HDMI cable from the Directv box to an HDMI input on the ...

Question about AVR588 Receiver

1 Answer

...play thew my reciever How do I connect direct tv to denon and then get sound If the RCA TV has HDMI input connect as follows: 1. Connect an HDMI cable from the Directv box to an HDMI input on the ...

Question about AVR588 Receiver

1 Answer

humming i have connected my pc to the phono input as i am not sure that there is an aux input but the humming increases with the volume Do not connect your PC output to the Phono input, it is a ...

...source selection Denon receiver AVR-3300. Unstable source selection: after manually selecting an input mode, e.g. tv, after a few minutes every couple of seconds a different source is selected by ...

Question about Harmony 550 Remote Control

1 Answer

my harmony 550 always stops one input before the one I need on my TV. my tv has an input button that cycles thru all of the inputs. i've already checked that the inputs are listed properly on the ...

Question about Harmony 550 Remote Control

2 Answers

how to program the autio vidio inputs for zenith tv Hi cathie If you have sound it means that the tv is in aux/video mode. Now make sure that the video output of the vcr is connected to the same ...

Question about AVR1611 5 Channels Receiver

1 Answer

...I have to press the quick select sat/cable button to start it up again. hi, There are two types of input for sat/cable in your amplifier. One is the Digital input and the other is the Analogue

Question about AVR1611 5 Channels Receiver

1 Answer

What is the ohm value of the input volume controls on this amp? For the Tascam DP-01 Digital 8-Track Portastudio, here are some of the specs: Analog specifications Inputs (A And B) 1/4" Phone ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

Cindy Wells

Level 3 Expert

6187 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...