20 Most Recent
Plantronics Discovery 925 Bluetooth Headset Questions & Answers
925 is paired but has no sound
i had a similar problem. what had happened was maybe a piece of small lint or plastic got inside or broke off inside of headset and blocked the tiny hole at the tip. anyways, use a safety pin or anything small enough to unblock the hole.
Problems with dicovery 925 keep
Something you may want to try is start from the beginning. Check to make
sure there are no other bluetooth devices loaded onto your phone that
might interfere with the process. Turn off your phone. Disconnecting the
battery of your mobile for 30 seconds and reconnecting helps to reset
the phone. The instructions for turning off the headset and re-pairing
the two devices are located in the following link for the Plantronics
Discovery 925 User's Guide.
Plantronics Discovery 925 User's GuideGood luck from
Headsets Direct!
I own a Plantronics Discovery
The headset may still be listed on the computer, you need to delete it
and then re-pair it back up the computer. When your computer crashed you
didn't say if the bluetooth is on the computer or if it is something
that is an adapter, which may have been damaged in the crash.
Good luck from
Headsets Direct!
How do i put it into pairing mode?
Hi!
To put your Plantronics headset into pairing mode: with headset OFF please press and hold the CALL CONTROL button until the light on the headset begins to flash red and blue.
When the other device (e.g. mobile phone) ask for entering a passcode, please enter 0000.
Please let me know if it helped.
Regards,
Not finding what you are looking for?