Confirmation page prints with image..how do I change that?
SOURCE: Print out confirmation with image on page
press
function
7
monitor key slowly 4 times
3
set
look on the sheet for confirmation + image parameter
set with above procedure but use number 74
set
SOURCE: Need to set Panasonic UF 890 to print out confirmation of a sent
Press
Function 74
set
12
set
2 for always
set
stop
SOURCE: Panafax UF-550 Plain Paper Laser Fax: I have a Panasonic Panafax uf-550 and I need to kn...
press
function
74
set
12
set
2
set
stop
SOURCE: I have a Panasonic Panafax uf-550 and I need to kn...
Apparently, you can set it for the default condition or you
can set it for the current fax you are sending.
To set the default:
1. Press "Function" then "74" then "Set"
2. Press "12" then "Set"
3. Press "1" for OFF
Press "2" for ALWAYS
Press "3" for INCOMPLETE only
4. Press "Set"
5. Press "Stop"
If you want to over-ride the default for the current fax,
1. Press "Function" then "8"
2. Press "1" then "Set"
3. Press "1" for OFF
Press "2" for ON (always print out)
Press "3" for INCOMPLETE only
4. Press "SET
Thanks to FixinFax for the clue for the default setting.
Alex Cook
151 views
Usually answered in minutes!
×