Help me... Hi good day, I have problem in my tally software , my hard disk drive was crash, then I well install new hard disk in my pc .and install my tally software ,but they problem now I cannot activate my tally software(LICENSED IS ALREADY ACTIVATED ,PLEASE SURRENDER IT AND TRY AGAIN) PLEASE help me this problem?thanks

if u have tally software which is ur instaled in your computer. again install the previous operating system in other drive like "D" & "E". then recover the drive "C" by using "recuva recovery software". then find the your tally files and save it in another place like "DVD" disk.
then install your tally software and use it . all the best my frnd.

The two "whirring" noises that you hear on power up is normal. The beauty of having a new macbook is you can reinstall the software very easily and a fresh install should fix your problem. Put the disk that came with the machine into the disk drive and turn the computer off. Turn it back on and press and HOLD the "alt" button until you are given the option of booting from your hard drive or your disk. Choose the disk and when it boots up, FIRST go to disk utility and verify the hard drive. If it comes back with no problems, proceed with the fresh install of the system by following the prompts on the disk.

If you installed windows on the new hard drive, you will also need to reinstall the Orbicam Software.

Hi

can you please explain to us how the hard drive crashed during a bios update ?
or how do you know that the hard drive crashed during bios update

many thanks

And did you try to reinstall windows while original hard drive was still in the laptop
did you press the F11 key as soon as you pressed the power on key

Too late! Hard drive has crashed.
Fit a new hard drive and load your recovery disc or system disc.

you cannot usually switch installed operating systems from computer to computer like that and still expect windows to boot, but with windows 98 it *might* work.

to install windows 98 on the usb drive, insert and boot from the windows 98 disk like you were to install it on that computer , and then, it should, before it formats any drives, give you a choice of what drive to format.

If your hard disk crashed then it sounds like the boot partition is corrupted or gone. I'm not sure you can rescue this without some professional software or help for that matter.

Might be just as easy & cheaper to buy a new hard drive & instal from scratch. Hard drive prices have dropped significantly over the last few years & at least you'll get a warranty with the new one!

Hope this helps

You can get to the BIOS by hitting DEL or F2 at start up.

However, that does not have anything to do with a drive letter.

Drive letter designation is set in
START>SETTINGS>CONTROL PANEL>ADMINISTRATIVE TOOLS>COMPUTER MANAGEMENT>DISK MANAGEMENT.

Hope this helps.

Hi good day, I have problem in my tally software , my hard disk drive was crash, then I well install my new hard disk .and install my tally software ,but they problem now I cannot activate my tally software(LICENSED IS ALREADY ACTIVATED ,PLEASE SURRENDER IT AND TRY AGAIN) PLEASE help me this problem…thanks

it doesnot matter that tally is original or pirated, but if it is original

after taking the backup of tally you must to surrender the tally online,to tally solutions. after that whenever you want to install it again it can.....

but now days i seen a new problem with tally,

whether your tally is orginal or pirated its getting damaged....and when you talk to tally solutions you are forced to upgrade it in tally 9.0 by paying another 6500/-