Can't get my laptop to communicate with the palm

Try using 0000 - that is four zeros - or 1234.
Those are the usual default passwords given by that manufacturer. When all else fails, contact the manufacturer! If you haven't already tried simply pressing the Enter Key with no password in the dialog box first.
Good Luck!

Here is link to download your user manual.
http://kb.palm.com/wps/portal/kb/na/tungsten/e2/unlocked/downloads/page_en.html
Good Luck.

for hard reset press reset hole and same time hold power button and release after 10 seconds choose yes when option given to erase all data. Please make sure you have backed up your data prior to hard reset as it will erase all personal information and set everything to factory default

Here is the User manual for the E2:

http://www.palm.com/us/support/handbooks/tungstene2/en/tungstene2_handbook.pdf


Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Must go into system on E2 and tell it to format card.

Check the PAlm quickstart guide here: Tungsten/E2.

Check also Palm E2 Instructions

New PC a Vista or XP

As the previous responder said, the Tungsten E2 cannot read cards over 1 GB. However, there is a wonderful solution available at PalmPowerups.com called PowerSDHC. This wonderful little driver will enable the E2 to read cards of any size! At $20.95, it's a bargain. I installed it on my E2 and now I use an 8 GB SDHC chip!

Please click the below mentioned link to download the desktop software for Palm Tungsten E2:

Palm Desktop 6.2 and HotSync Manager 7.0 for Palm Tungsten E2 (Vista/XP)

Thank you

Here is support page for your product

Here is online User Guide