My digital camera C-370 got wet and wont function anymore

just get a new one,its beyond economical repair

this is due to dust or moisture if you take this type of cameras near seashore this happens. keep it near 60 w bulb for 1 hour and then blow the dust particals with help of blower

photo's on the beach, camera obstructed? Could it be you got sand in your camera? Didyou change your lens while on (or near to) the beach? Sand in your shutter can obstruct the shutter in that case the camera has to be cleanded i don't know what the costs are for a cleaning of the body.

I brought my cybershot 7.2 to the beach, and stupid me did not have it in a proper camera case, and I am sure that a grain or two of sand got into the zoom lens. I used a sewing needle to no avail to try to probe this out, and in the end all I did was use my fingernail to help pull the zoom lens out, when turning the camera on, this worked perfectly after a few try's and the camera is now functioning as good as new.

The grain(s) of sand were obviously preventing the motor from opening the zoom lens.

Hope this helps.

Steve

I do not want you to break this anymore then its already so I would refer you to a camera shop to have it cleaned out. But in genral you need a can of compresed treated air open up the camera and give it a couple shots of air in the lens assy this would clean it out and unstick the lens.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

E:91:01 is a flash unit error, probably meaning your flash is inoperative .
Try settings, main menu, setup, initialise.
If this does not work, then new flash module required.

that function is a browsing pictures mode....its jumps from 10 to 10 ...or what ever you set it ..u can use it when you have a big amount of pictures..I mean thousands ...( its possible when you have picks about 1,5 M and have a 4 G card...and you look for a specific set of pictures...taken in a certain moment ....its kinda like a ffwd ....for the second ...you can easy clean it with one of those cleaners for spectacles or a wet Kleenex ..and for the continuous mode you probably have the option in the seting menu ...aside with the vision mode ..and light seting ...

Turn camera ON
Scrol with Menu Burtton to time and date .
Scroll far right and set time and date.
When taking pictures put on the Beach or Snow mode.
Vitally

go under scenes on your camera
&& there should be a list saying in exact oreder
-auto
-P-mode
-portrait
-night portrait
-landscape
-sport
-night landscape
-backlight
-museum
-snow
-sunset
-fireworks
-party
-beach
-copy
-video

you have selected video
so whe you press the pic button it starts to record right?
well go under scene && click on auto

any other question ?

-alikins :)

salt is electrically conductive when in fluid (water) so when it happened i hope you pulled out the battery and protected the delicate lenses. a digital cam, is very delicate but their are companys that repair water damaged goods like mobile phones etc! just look them up in the yellow pages etc... avoid trying to switch it on until it gets repaired, but the mem card should still be fine depending on how long it was wet for! good luck!