Palm power I have a Palm Tungsten E2 that turns on by itself. Could someone tell me how to fix this problem?

Can some one tell me how to power cycle the Tungsten E2.........Urgent Help needed

I too was having this problem all of a sudden. I found another post about an apparent bug in the Palm OS. Do you have a birthday or appointment in the calendar with reminders that started in 2009? Try removing the reminders or making them start in 2010. I did that and my Palm now stays off when I power it off.

Hello there and welcome to lfete at Fixya, the Support Team

Maybe there is a setting for the stand by mode in the phone, you have to adjust that. Go to the settings in the phone and find the phone settings and adjust these settings.

Hope that helps
IF NOT then try to return here
Have a nice time over there
Please rate my answer

You can take the back off and unplug the battery for a few mins, this sometimes will clear a logic lock

Turn it on pressing the reset at the same time or take out battery and unplug/plug the battery. Your battery may have died. If this is helpful, post as such. If it is a fixya, post as such. I had an E2, can tell you alot about it. TY

Plug you E2 into your PC for 8 hours to slow charge. Press reset button on back and later in life your E2 will come on by itself.

Turn it on with the reset button on the back side pushed in.

Must go into system on E2 and tell it to format card.

Check the PAlm quickstart guide here: Tungsten/E2.

Check also Palm E2 Instructions

Hi : This means your battery must be as dead can be. Therefore it seems to be getting straight power only when you plug in the charger. Or your on/off button is dead. Are you able to turn it off/on when you have charge plugged. If so then I suggest getting a new battery for the E2 Palm and you should be back up and running. If this is not the case then it is your on/off button in which it could be just the contact or the switch itself. I can suggest someone in US if you like, else I can handle it but I am in AUS.