An error on camera detected, will automatically shotdown

lens may be slightly experiencing a focus error . try cleaning the lens and contacts .

or set the switch to manual focus

See http://www.fixya.com/support/r13011856-lens_error

I am sorry to say that the only way this is going to stop is to have your camera repaired !!! It requires service and there is no way around it.

canon powershot sd1400 wont turn on and its not the lens

Good day,

The CHECK DIAG appears in the view finder when the camera's automatic self diagnostic function detects an abnormality.

From here you must first perform error checking on your camera by doing the following:

Press the menu dial.
This will perform the error check on the Digital Signal Processing(DSP) and the Memory Circuits.
When no error is detected OK will appear.
If an error is detected it will be displayed next to DSP or Memory on the screen. Diag Error will also appear.
If Diag Error appears contact your Sony dealer!

What this means is that the camera is doing a routine check or has detected an abnormality with the system.

I hope it is just performing a routine check and there is nothing wrong with your camera!

Best of luck and let me know if this was useful!

Kind regards

If your hardware changes are not detected then restart your system and then see if not then follow the easy steps and fix your problem

What it fixes...

• When you install a hardware device, it is not detected
• Determine if your audio device is plugged in
• Driver updates aren't automatically installed by Windows Update
• You receive one of the following errors:
• Your &ltDevice Name> is currently disabled or turned off in Windows
• Your &ltDevice Name> has a driver problem and needs to be reinstalled
• Windows has detected a problem with your &ltDevice Name>, it is not working properly
• There is no driver installed for your &ltDevice Name>

How it works... Microsoft Automated Troubleshooting Services scans your computer and detects the root causes of common problems, then Automatically fixes the problems that it finds, and Offers additional resources if the problem isn't fixed Instruction to Run...

• Click the Run button to launch the file
• Click the Continue and/or Allow button to proceed

Please rate me if this solution works for you

Thanks......Have a great time

http://a4tech.com/products.asp?cid=77&scid=160&page=1

Lens error is usually caused by mechanical faults concerning lens assembly. The lens cannot extend or retract fully, the error is detected and lens error is returned.
Sometimes this can be fixed playing with the lens during extraction or retraction to help the lens asset getting back to normal.
More often the camera lens must be disassembled and re-assembled by a technician to fix the problem.

have you tried reinstall OS ?

my computer is automatic shotdown in 15 min...what is the problem of my pc? all connection are connected and i'll checked the cards.and the settins are correct..what is the solution?