At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Hi,
I have a sharp UX-B750 fax machine and when i try to use a refilled ink cartridge on it it says its out of ink. Is there a way to disable the ink level sensor? please let me know Thanks-Gary
There's some kind of a chip chip in the catridge that notifies the printer that the same cartridge has been refilled. to get around this check keep atleast 2 or 3 empty cartridges, refill and cycle them. That should do the trick!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi first make sure you have paper and ink in the fax. If you do, then unplug it for a min. It will hold the memory when unplugged. When you plug it back in it should print out. Good luck
Your reception mode is set to TEL/FAX or TEL mode, to set it to automatically receive faxes it should be set to FAX. Look at the LCD display ( right section ).
To change the reception mode you can print the HELP LIST by pressing COPY/HELP button.
You can also put the machine in serves mode by unplugging the power from the machine, press both the the copy/help and the stop buttons at the same time, hold them and plug back the power until you see TF662B service mode.This also works well with refill cartridges.
YJ
You should be able to, but the problem is this:
they only refill it, if there is a problem with the cartridge it doesn't help.
there is more to just putting ink in a cartridge.
1- you must clean the inside removing dried ink
2-you must clean the nozzles tomake sure the ink can flow
3-replace any pads inside
4-refill ink
I have heard complaints about Walgreens so take your chances, a better solution may be a company called Rapid refill ink ( they do all the above to their ink crtgs)
×