Sony bravia start up boing noise is irritating help

I have same problem with klv-32t550a i thinkk this is a error of display card

press options on the remote and go to sound settings - look for 'custom' and switch off sound booster
or under sound settings - select reset

I'm sorry, but you can't. They are like most (not all) Samsung models with the start up chime. It's built into the software. I will be speaking with a Sony Rep this week and will ask him if they have an answer to this issue. If I find they do I will post it on google. Just type "Its Sony Chime"

Could be the power board or main board defective, but I suggest you do firmware update first. Go to http://esupport.sony.com/US/perl/swu-list.pl?mdl=KDL42V4100&LOC=3#div_pos_30 download the software.

maybe you should stop scamming people

Press Display button on remote once and on screen dsiplay will disappear.

what model of Sony is it? On many of the Sony projectors, a 3 flash error code indicates the lamp is not properly seated/installed or the lamp door is not closed properly

It is most likely a fan (there are 2 to 3 of them in the set) that is making the noise. I doubt seriously that the lamp is causing a buzzing noise. The only other buzzing sound can come from the ballast wich powers the lamp.

http://forum.ecoustics.com/bbs/messages/2/176039.html <-- Check that out.

Also I have a Sony Bravia and it clicks while it is on as well. I read that forum and some people said to disconnect the cable box for 10 sec. and then some said it was the heat from the summer.. i don't know.. I just turned my tv off and then back on and it stoped. I read this is happening with all kinds of TVs....

Each time our TV starts the snapping sound we reboot the cable box. Problem solved.