Autohelm ST 50 Code Lock

To open its child lock, you might have its original remote control. Try these methods. Locate the manual for your television. Though slightly embarrassing, accidentally turning on the child lock to a TV is a common problem. The section In the manual about how to set the child lock feature will also explain how to unlock it.
Try a few "universal methods" for unlocking the child lock. Some televisions have a universal code built in for disabling the child lock --no matter what your code is. A common code is "0000."
Unplug your television for a few minutes. The internal battery of the TV is what helps remember what your code. If the TV is unplugged for an extended period of time, it clears the internal memory, which in turn will reset your child lock code.
If you wish to buy its original remote control, you have to contact the authorized service center. If you wish to buy a universal remote control, you should know about, which brand remote control have setup code to your TV/device brand. You should first make sure about the number of digits in the codes to your device have. There are 3-digit, 4-digit, 5-digit and even 2-digit codes. You can get this detail by the code list attached to every universal remote control. The brand name of the remote control you select isn't a matter; but, its code list should have setup codes to your TV/device brand, otherwise you can't set it up with your device. Check this link and note which brand remote control have set-up codes to your device brand, and buy that brand remote control, according to availability.

hello The parental control menu enables
you to limit access to programs that
may contain objectionable material
or are not suitable for viewing by
children. The default access code is
0711
may contain objectionable material
or are not suitable for viewing by
children. The default access code is
0711.
The following table provides details
about the menu items:
Component Function Range / Options
Lock Enable Enables the parental control lock. When
enabled, channels with objectionable viewing
content are blocked and can only be
accessed with a password. You can block
channels according to the movie or TV ratings
of the channel’s programs.
Off, On
Movie Rating Helps you block programs based on their
movie ratings. See “Movie Rating” on
page 25 for more details.
–
TV Rating Helps you block programs based on their TV
ratings. See “TV Rating” on page 26.
–
Change Code Changes the password for the parental control
lock.
Press the number keys to
change the password.
Reset Resets all channels and programs to their
default factory settings.
–

regards
shaun
Parental Control Menu
Lock Enable
Change Code
Reset
Back
Main Menu
Picture
Sound
Size
PIP/PBP
Parental Control
Channel Setup
Setup
Exit
Press Right to Enter
Press Right to Enter
Press Right to Enter
Press New Code
Off On
TV Rating
Movie

You try all 0's? Thats the default access code on lots of things, and according to your manual, your lock.

look in your owner manual there is a reset code for the anti theft, im sure of it. let me know if you have questions about my answer, thanks.

when the car was brand new it had or should have had a sticker on the radio telling u the code. if u do not have the sticker only the dealer can figure it out by researching the part number.

If you know your original lock code, take it in to your service provider, each code is diffrent and can only be programed manually, if you dont know your original lock code you will have to sacrific all info pics,mess,numbers, etc. by a reset... I can guide you through the steps to erase all if you lost your Unlock code, or switch back to nam1 if you know your lock code, ( when you switch back, if security is on automatic lock, password is required) intial programing code is not your Unlock code.

According to the manual, "If you forget the password, you can erase your current password by pressing the number 8 button on the remote four times, thn press the enter button to confirm the setting. PASSWORD: 8888"

A picture of an unlocked lock indicates that Parent Lock is NOT active.

Parent Lock Levels:
1: Kid Safe 5 : PG_R
2: G 6 : R
3: PG 7 : NC _17
4: PG_13 8: Adult

It also says that it takes 3-5 seconds to reset the unit to the factory default. I hope this helps! Karen

enter the security lock code 000000 try it! it worked in my phone

the lock code is the last 4 digits of your phone number. For example if your number is 123-345-6789, your security code is 6789.

try using the last 4 digits of the cell phone number.