- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you need the drivers to your video card, put your motherboard driver CD that comes with your computer run setup install Graphic driver if your lost driver CD, you may download install from given link here DriverPack Solution
On the CD that came with your camera, you find software and drivers for al sorts of operating systems, that don't have drivers at hand. Like the new windows versions, the drivers should be in there already. If you lost the CD, but you registered your camera online, most firms can deliver drivers long after you bought the camera.
If you can't get the drivers, you alway can put the pictures on your PC, using a card reader. That is when you have a memory card that goes into a card reader. When you want to buy a card reader, take one of your memory cards to the shop and check before you buy, if the card goes into the reader.
If your photos are stored on the memory card, then removethe memory card from the camera and insert it into an USB memory card reader.Connect this USB memory card reader and memory card into the USB port of yourworking computer. Your computer will see this as an USB Mass Storage Device oran external storage device; you can then open the folder on the memory card andcopy the photos to your computer.Memory card reader is a handy device and is inexpensive. Youcan copy photos from other cameras and you can also download photos off yourmemory card to someone else's computer without the need of installing anyprograms.
1. Follow this link for the Dynex drivers: http://www.dynexproducts.com/products/computers/DX-CRMN1.html Although this page is for the Dynex 6-in-1 USB 2.0 Mini Memory Card Reader, it should work for your 5-in-1 Reader. Post back here if it doesn't.
2. Click on Windows or Mac under Drivers, Firmware and Software.
3. Download file.
4. Open driver installation package and install driver.
I would take out the SD memory card and use it with a card reader like this one: http://bit.ly/5fruhB . You simply take out the SD memory card and put it in the card reader. Then put the usb end of the card reader into your computer and download the pictures that way.I also recommend that you download Picasa, a free photo organizer/editor for your pictures: http://bit.ly/5f6HEt This way you bypass the lousy Polaroid software altogether. Hope that was helpful, Take Care, -WN
×