I need parts to repair dvd recorder model dr165

Issue On the logic IC processor due to overload static Cause power lost during initial Statut ..Unit need service ...Capacitor fail on Digit logic processor... Or unplug unit for several hour and try agant good luck

I understand that Funai corp makes these iLo DVD player/ recorders but when I spoke to someone, they did not recignize the model number. Their number and address is :FUNAI CORPORATION Customer Service Tel :1-800-605-8453 http://www.funai-corp.com 19900 Van Ness Avenue, Torrance, CA 90501 Good Luck

I Have Same Problem .......Any body can help ??????

if your dvd contains video files and songs and photo files, it will let you to access them all in individual category. you can select them one by one , by pressing title button in the remote. the frequent problem being faced by this recorder is that taking too much time to recognize the tipe of file, it's very big bug. you may change the lens to recover this error.

PROGRESIVE SCAN will only work with an HD TV and it does not work via the scart lead. Select off for it if you have an old TV. If you can't get it to stop coming on by doing what it says to do, then you have an electrical fault on the LG.
PROGRESIVE SCAN itself is a method of getting high quality images on HD TV's via the special sockets at the back of the DVD.

ok, download from--
http://safemanuals.com/user-guide-instructions-owner-manual/LG/DR165-_E
but before you need register on the site 
thank for using FixYa.

I had the same problem. It was fixed under warranty. It was some sort of alignment problem. It would not play SOME commercially produced DVD's either.

go to dvd set up then scroll dow to lock then push 0 seven times

No you need a dvd recorder or burner. This is only a player. The Vcr part should have a record button but the dvd part should not.

Sounds like the laser head carriage slides or screw drive need oil or the screw drive may have dirt in it that will cause uneven movement or possible jamming of the carriage on the slide.

The carriage and drive screw need to move smoothly. The slides can easly be oiled. The screw however can be difficult to clean. Using paper can make it worse due to the paper fibre getting into the screw as well. You could try a lint free material to clean the screw and then oil it, preferably with a non drying oil.