20 Most Recent
Questions & Answers
DVD/VCR stuck in Progressive scan mode
With NO DISK in the DVD player PRESS PLAY, (display will say "no disk" or something similar) then PRESS STOP AND HOLD FOR 5-10 SECS.
Our DVD was stuck on Progressive Scan Mode for over 1 year, this fixed it. I had tried the press stop, press stop and hold while playing a movie, but not while there was no disk.
Try it & Good Luck!!!!!!!!
on Jan 14, 2015
How to turn off progressive scan without remote
You should have manual controls on the face of the unit to bypass the remote functions. If the current remote is failing, try a Universal Remote. The only way to get a complete answer is to read the manual that came with your device, or go on line to the Zenith Co. web site and seek support.
on Dec 25, 2013
Cannot turn off progressive scan mode on blue screen to play dvd
If you have not already seen this or done it - it worked for us:
On page 18 of the user manual under Progressive scan there is a Caution which says - If you set Progressive Scan to On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "dISC " is displayed on the display window. 2) Press STOP (9) and hold it for more than five seconds before releasing it. The video output will be restored to the standard setting and a picture once again be visible on a conventional analog TV or monitor.
on Mar 30, 2013
Not finding what you are looking for?