At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Either you take it to a repair shop and ask them if they think they could rig you with an improvised button, or you contact canon and ask them how much would it be to have a new button fitted in.
I would first try to find out if the camera has recieved any more damage when it was dropped. it might not be worth to spend money on fixing just the button.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Well this just does not sound like you are having a good day !! This is nothing more than bad news, You broke your camera and as if this is not bad enough it is going to cost you more to fix it than it will cost to replace it. So just go ahead and buy another camera and save the repair money.
Hi! I strongly suggest that you remove the battery as a first course of action. After removal, press hold the power button for 15secs. to reset the system then install the battery again. Turn the unit on then see how it goes. Hope this helps and thank you for using FIxYa!
These kind of problem cannot be solved unless the phone is examined. Some part of the board might be short circuited due to the entry of water. You will have to give the phone to the authorised service center to get the stuff repaired.
Theres a very good chance you are going to have it repaired by a Camera Repair person. I would really need to know the brand and model.
If it is a canon then it will most def. need a new lens assembly. they have metal pins which guide the lens and when they are droped the pins break out of place.
If it is a Nikon or Sony or Casio alot of times I have been able to push the lens straight and it will re-align itself and work perfect again. But that said I wouldnt be too forceful unless the camera is not worth fixing. In that case you really arnt risking anything other than the possibility of fixing it.
Is it possible that you've gone into M (manual) mode and the shutter speed is fast and a small aperture (large number) been selected? Or has the Exposure compensation been adjusted to be -2? Does it do the same thing in fully automatic mode? It certainly sounds like some setting has been adjusted incorrectly.