Mitsubishi big screen

I have an old Mitsubishi Tv , your instruction manual is good and thorough and if you don't find it there check online with http://www.mitsubishi-tv.com/ use the support section there.

Hello
I thinks that you have its original remote handset with you now, and posts this solution. If you don't have it, either buy a new original remote handset or try to get it from any of your friends and relatives, who owns the same model of Mitsubishi Tv, you have now; only to unlock it. After unlock, you can use any other remote control.
Mitsubishi sets use a four-digit code for a V-Chip locked program, view a locked TV, cancel the lock, or to enter the V-Chip lock menus. You can view the locked shows on the TV set by pressing the number 9 and QV buttons on the remote at the same time, whenever your code is requested. This process temporarily unlocks the TV and asks you to enter a new code.
OK.

No, you need to replace your convergence ICs STK392-570 Call Mats Electronics 1-800-628-1118

Mitsubishi WS-55807 Manual

I think that the solution that you are seeking is on page 63 of the manual.

Using the Mitsubishi remote, go to the locked function and when it asks for the code pres QV and 9 at the same time on the remote, this will work in any mode which may be locked, including entering a new password!

try unplugging tv for 30 minutes remove all speaker away from tv and anything magnetic after 30 mins turn back on try that

I believe I have a convergence problem with my VS-45605, i cannot get the front panel controls to move the blue and red crosses. I dont have original remote and a universal remote doesnt work either, any suggestions.

Do self test first then get error codes, look in threads here or at ctechnicians.com

Good Day, jake1;

This TV is not known for this problem, but when TV has blue screen, it normally means the TV is lacking a signal. Ensure you have that.

Do you get OSD, on screen display? Try different inputs such as DVD. What happens?

Let me know, big IRISH.

Easy! But you will need the original remote. On the remote is a button called QV for quick veiw. Press that button at the same time with the 9 button. This will open the lock, But it will return when you turn off the set and turn back on again. If you want it to do a normal turn on , once you open the lock you must go into the menu and remove the lock from the set completely. You may be able to find a friend or a store that might let you borrow an original remote? Sorry to be the bearer of poor news my friend. Good Luck