20 Most Recent Mitsubishi WS-65807 65" Rear Projection Television Questions & Answers

0helpful
1answer

We have a Mitsubishi Tv

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://homenol.blogspot.com/ http://electronicshelponline.blogspot.com/ If blinks continue without any pause, the main board is faulty. Search the site by type in the "brand name" to your device, [Exclude the model number] in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
11/1/2017 12:44:34 PM • Mitsubishi... • Answered on Nov 01, 2017
0helpful
1answer

Mitsubishi 65 inch rear projector

Short answer: No. The board and install will cost you more than an LCD/LED flat screen TV. Sorry for the bad news, but you will save space and electricity with the new TV. Next problem: Trashing the projection TV.
10/25/2017 1:31:40 AM • Mitsubishi... • Answered on Oct 25, 2017
0helpful
1answer

My ws-65807 wont turn on or stay on

do the self check if it comes on for a moment and then the power light goes off.

On the front of the set hold both the MENU and INPUT(also called DEVICE) together for at least five seconds and then release both buttons.

The power light will blink an error code--for example 2 blinks a pause and 2 blinks--it will repeat it several times. 2,2 is the most common error code for this set.

Let me know what you find and I will tell you what it means--it is designed to give a quick idea of what is wrong with the set.

if this helped you rate this solution as I do this here for free.

SD TECH
8/9/2017 4:39:10 PM • Mitsubishi... • Answered on Aug 09, 2017
0helpful
1answer

Mitsubishi 65" rear projection turns off immediately

I would just replace the TV.
6/24/2017 5:02:24 PM • Mitsubishi... • Answered on Jun 24, 2017
0helpful
2answers

Words on screen are 3

YOU may have two problems, 3 d picture or letters suggests convergence problem, Tell me more, all inputs have no function?

The more you tell me the better I can help.

I am expert with these sets and know them well.

SD TECH
9/13/2016 12:43:07 PM • Mitsubishi... • Answered on Sep 13, 2016
0helpful
1answer

The picture screen is green and red.

It sounds like one of the three color guns has failed and based on the fact that you have red and green that would leave the blue gun as the culprit.
2/16/2016 3:35:10 PM • Mitsubishi... • Answered on Feb 16, 2016
0answers
0answers
0answers
0helpful
2answers

Our Mitsubishi projection tv went

MOST OF THESE SETS HAVE A SELF DIAGNOSTIC:

UNPLUG TV AND THEN PLUG BACK IN---TURN ON---GREEN POWER LIGHT COMES ONFOR A MOMENT AND GOES OFF.

PRESS AND HOLD "device"(input) and "menu"buttons on front of tv for at least 5 seconds and then release both together.


Watch for power light to blink in a sequence:

1 blink-then 2 blinks-------no error

2 blink-then 1 blink-------X-ray protection

2 blink-then 2 blink-------SHORT PROTECTION*******

2 blink-then 3 blink---------deflection circuit problem

2 blink-then 4 blink---------vertical circuit problem


******2, then 2 is most common---usually means one of the fuses that protectthe Convergence IC or IC's is blown---set will detect no voltage to convergenceIC and shut down.


SET WILL REPEAT BLINK ERROR CODE UP TO 5 TIMES ANDTHEN TO GET IT TO REPEAT MORE YOUHAVE TO UNPLUG SET AND TRY TO TURN ON AGAIN.


IF IT IS 2 AND THEN 2---USUALLY
CONVERGENCE CIRCUIT PROBLEM

let me know what you find--hope that you find 2 blinks, a pause and twoblinks--this is the most common and easiest to fix.
SD TECH
11/30/2013 2:48:03 PM • Mitsubishi... • Answered on Nov 30, 2013
0helpful
1answer

My 65inch Mitsubishi tv started humming and

follow this steps and fix it. God bless you
  • Reset component settings. Usually, the problems you encounter with a projection TV may be resolved through the resetting to its factory settings. If you experience inaccuracies in the color, reset the television's PerfectTint/PerfectColor capabilities. Simply press the Menu tab and then highlight "Perfect Color" using your right key arrow. After this, press "Enter" and then "Reset" in order to reset to factory settings. If you have audio / video problems (VCR or DVD player), simply press "Menu" and highlight the "Reset" option.
Reset television controls. In case you cannot fix your TV via its component settings, there are other ways of resetting. Just select "Menu", key in "1, 2, 3", and then press "Enter." In doing this, the TV's manufacturer's specifications will all be restored. If your TV's power system does not function, you should perform a complete system reset. You can do this by clicking on Reset System button located at the TV's control panel. Your television will be turned off and then a green light (LED) will quickly flash for approximately one minute. Once the light has stopped flashing, your TV should immediately turn on.
7/31/2013 1:41:41 PM • Mitsubishi... • Answered on Jul 31, 2013
Not finding what you are looking for?
Mitsubishi WS-65807 65" Rear Projection Television Logo

271 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Jaime Hernandez

Level 3 Expert

2345 Answers

Cindy Wells

Level 3 Expert

6526 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Mitsubishi Televison & Video

  • Mitsubishi Televison & Video

Most Popular Question

add hdmi port mitsubishi ws 65807

  • Televison & Video
Loading...