Cooktops Logo

Related Topics:

Posted on Sep 05, 2011

Hotpoint induction hob ET7424 was on yesterday, then cut off with 3 lines apearing on two of the dials - it wouldn't turn on again. The job had only been on for about 10 minutes

4 Related Answers

Anonymous

  • 63 Answers
  • Posted on Mar 10, 2009

SOURCE: Burnt induction hob

hi my name is mark, you can try softscrub or a glass cook top cleaner made by jenn- air or a genaric brand from the supermarket.

Ad

Anonymous

  • 1 Answer
  • Posted on Nov 06, 2009

SOURCE: Neff induction hob safety lock

safety lock is on. How can I release safety lock?

Anonymous

  • 1 Answer
  • Posted on Aug 23, 2010

SOURCE: when turning on my 2 year old Neff induction Hob

Sadly I have no solution to this but have what seems to be exaclty the same problem. Mine is just over 2 years old and each time I use it it 'error' and turns itself off. Once I turnit on again it is fine. I'm checking the internet to see if it is a common fault withNEFF before calling them.

Anyone know a solution?

Anonymous

  • 1 Answer
  • Posted on Dec 20, 2010

SOURCE: Eurokera hob - lights flashing, buttons not working

hi i have a eurokers ceramic hob and it has not worked in about a yr. it is touch screen and only 1 mth old when problem happend it was like it over heated and now when you turn it on it flashes on the dial i cnat make out it and the hob wont come on. pls help it is brand new and dont want to throw it out.HELP PLS

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

My Hotpoint induction hob is flashing error F14. What do I do too rectify this please?

Error F14 on a Hotpoint induction hob typically indicates a problem with the touch control panel. Here are a few things you can try to fix this error:
  1. Disconnect the power supply to the hob for a few minutes, then reconnect it and see if the error persists.
  2. Try cleaning the touch control panel with a soft, dry cloth to remove any dirt or grime that may be causing the error.
  3. If the problem persists, you may need to reset the touch control panel. To do this, you will need to locate the reset button, which is usually located underneath the hob or inside the control panel. Press and hold the reset button for a few seconds, then release it and see if the error persists.
If these steps don't fix the problem, it's possible that the touch control panel is faulty and will need to be replaced. You may need to contact a professional for this repair.
I hope this helps! Let me know if you have any other questions.
Jan 06, 2023 • Cooktops
0helpful
1answer

I have a Hotpoint induction hob with cracked glass. I cannot find replacement Schott glass. Can anyone point me in the right direction?

A quick gargle turned up this;
https://www.google.com/search?client=firefox-b-d&q=hotpoint+induction+hob+replacement+glass
Dec 07, 2020 • Cooktops
0helpful
1answer

Hob ceran replace with new induction hob

Need looking at by NEFF , a big job .
0helpful
1answer

Hotpoint induction hob wont turn on

Check power supply at socket or meter box. Make sure that the circuit breaker hasn't tripped. Also, induction cooktops wont heat without induction cookware. They must be steel. Glass cookware wont work on an induction cooktop.
Jan 03, 2015 • Cooktops
0helpful
1answer

Telefunken spare parts australia

Try turning off the power for a short while to allow the p c board to re set itself turn it back on and individually turn on each elements for a few minutes. Good luck
Ray
0helpful
1answer

Glass on neff t4243 induction hob has cracked

hi,
is it possible to replace a cracked glass on my Neff induction hob?
where would I get the glass for my Neff induction hob replaced?
is it very costly?
the model number is t4483x2/09
Feb 28, 2012 • Cooktops
5helpful
3answers

When turning on my 2 year old Neff induction Hob T4543N1 it displays a full set of E errors and cuts out it does after two attempts corect itself and function perfectly

I had flashing Es every time I turned the hob on - got worse and worse until unusable. Neff help line useless - service call cost ridiculous. My problem was the capacitor on the 5 volt power supply had failed. 5 volt supply was at 3.8 volts. Replaced the capacitor and the hob's now perfect - a joy to use. Only helps if you are tech savvy and willing to open the unit, but may give you some hope or point you in the right direction.t
6helpful
1answer

Eurokera hob - lights flashing, buttons not working

hi i have a eurokers ceramic hob and it has not worked in about a yr. it is touch screen and only 1 mth old when problem happend it was like it over heated and now when you turn it on it flashes on the dial i cnat make out it and the hob wont come on. pls help it is brand new and dont want to throw it out.HELP PLS
Dec 26, 2009 • Cooktops
Not finding what you are looking for?

535 views

Ask a Question

Usually answered in minutes!

Top Whirlpool Cooktops Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66979 Answers

Are you a Whirlpool Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...