20 Most Recent
Dell Inspiron 1525 Laptop Jet Black - Page 2 Questions & Answers
How to reseat memory in Dell laptop
well this is not a certain fix for read write error but here goestake out batteryunplug from wall adapterno fuzzy clothingroll up sleeves wash hands very cleanopen memory panel(underneath)GENTLY open wing at end of first mem moduleplace on clean tissue on table face up on right of machinedo same on lower one put on leftinspect gold fingers(do not touch with your fingers)if ABSOLUTELY filthy rub GENTLY with soft red clean pencil eraser and glow softly over tablereplace memory in opposite direction(right goes in first and lower) then leftclose mem doorplug in adapter(no batt)start machinelet us know what happens
Dell inspiron shuts down
Check that the machine is not running too hot as this will cause the system to shut down to prevent thermal damage.
Dell camara web dell
You can download the WEBcan and device drivers from Dell WEB site,the support download page. Make sure you select your model desktop or laptop,better still, type in the Service Tag number, it is printed on the label on thebottom of the laptop and on the back or sides of a desktop. (If the Service Taglabel is missing then go into the BIOS setting and on one of the BIOS pages,the Service Tag number will be displayed). This will open the page where thespecific drivers for your model computer are located. Also make sure you selectthe Windows of the drivers for your Windows operating system. Click on thislink to download the drivers: -
http://support.dell.com/support/downloads/index.aspx?c=us&l=en&s=gen
My screen keeps fading out,
Sounds like the video controller issue (either driver or physical controller itself). Can you make sure there is no issue with it? You can check by going to Right click on My computer, Manage, device manager, to see if you have any question mark, or red x under Display adapters? or any exclaimation point. If you have one, that is the issue. If you don't, you still might want to update driver for display adapter. Do you need help with download the driver for this? Let me know. We just want to rule out the issue with driver. If still not fixed after driver updated, then issue might be with hardware, either adapter or physical LCD screen. But let try the above step with updating driver first.
Let me know.
Thanks
Hardware scan shows failed surface
These are problems that cannot be fixed, basically your hard drive is on the way out. Typically this is caused by drops, bumps, etc. while the machine is on.It has a SATA 2.5" 120gb 5400 RPM drive, I would suggest a larger 7200 rpm drive but it is up to you. You will also have to reinstall windows to the new hard drive.
How do I disable microsoft
Copy and paste the following link into your internet browser:
http://www.techtalkz.com/windows-7/515981-enable-disable-bitlocker-drive-encryption-windows-7-a.html
This is for Windows 7 OS.
Not finding what you are looking for?