Top 20
HP Officejet H470 InkJet Printer Questions & Answers
THE BLACK INK IS BLIKING
Hello, First take the cartridge out and dab on a slightly damp paper towel and reinstall, and power down printer and try. If that doesn't work you will have to replace the black cartridge.
Mirror image properties
I think your image size is too large. when you command your printer to print the image. choose the paper size on which you want to print it.operating system will automatically set the image size to the paper size
Stopped - 'filter' failed
the filter is not running the ink and that means that the service station might be faulty, get a technician to have a look at the unit
Makes screeching noise
No, it can be because of dust or might be need some oil as well. it can be fixed, just clean the printer.
Printer is installed for wireless with network.
The issue is with your router. Without knowing anything else about your network equipment I can tell you the following.
The lease on the network address for the printer keeps expiring or another machine on your home network keeps taking the address while the printer is still leasing it.
The solution is to access your router's configuration page and basically reserve a network address for the printer.
That way when the lease for the printer's address is up, the router will just re-assign that address to it. Your computers also won't need to re-install the printer either because it will always have that network address.
As for another machine taking the address, you'll want to make sure that all the computers that connect to your network are set to dynamic (DHCP) network addressing. That should keep your printer online for a good while.
Paper wont feed on HP
The paper pick up fingers and rollers get smooth and polished with use and then slide on the paper. Clean the rollers and pick mechanisms with isopropyl alcohol to rejuvenate them and restore their grip on the paper. Do this as far along the paper path as you can get, using Q Tips where necessary and turn the rollers to clean their whole surfaces.
Want to check my ink
Hello. It is very unusual that you dont have this tab (top right corner of printing preferences)
This could indicate that you are using a generic driver and not the latest from HP. You can download this driver from there web site and the services tab should appear. This is the only way to check the levels.
Regards
GM
Please: Ink service module
try this remove the tank and soak in warm water. flush it out till it is clean. there iare no electronics on the tank so clean it and dry it and put it back in. (the tank is located on the bottom panel it looks like a battery compartment door) with tank reinstalled power on the printer push the cancel and resume button at same time and hold for 8 sec. then hold the power button down and tap the resume button 4 times. your printer is now reset and all the warning lights will go out either instantly or i have seen it take a few on-offs. hope it helps you out.
My printer is reading it
Hello,
What you need to do is to set it online. Here's the procedure on how to do it.
1. Go to start>control panel>hardware and sound>printers
2. It will show you a list of the installed printers in the computer.
3. Right click on the HP printer and click on online.
I just installed my new
make sure plastic or tape is off the ink cardlidges that came with computer theres 2 of them and they peel off the fron of ink cardlidge then put them back in and then restart computer.
Not finding what you are looking for?