20 Most Recent Jensen MCDA1 AM/FM/MP3/ Stereo with 10-Disc CD Changer and Amplifier Questions & Answers

Jensen MCDA1 10 CD Changer

Had the same problem. It's the microswitch/eject button-reset. The wires were-soldered.works fine.you actually have to remove the switch to inspect the soldering.

Jensen MCDA1... | Answered on May 14, 2012

1 Answer

Why can't I receive AM or FM radio

check the aerial is plugged in properly at the back of the radio

Jensen MCDA1... | Answered on Mar 12, 2011

2 Answers

I have a Jensen stereo cd/dvd player and when I load a cd or dvd into it constantly is loading and doesn't proceed

I used to own Jensen cd player for a while but I can't remember the solution of loop loading. Check Jensen cd-players manuals http://jensen.manymanuals.com/cd-players

Jensen Car Audio... | Answered on Nov 21, 2020

1 Answer

Driving in an old RV. Have a Jensen car radio/DVD player with Bluetooth. Yesterday, we had sound up in the front of the RV, today we only have sound in the back. Can move the selector for sound but will only play in the back. Help!

Possibly failure of the selector

Jensen Car Audio... | Answered on Nov 19, 2020

1 Answer

Jensen vx7022 head unit for car i was updating firmware and it got to the calibration screen and wont go any further no my unit doesn't work at all please help

There is always a chance that you "bricked" the unit with the update. IT happens. When you get to the cross hairs you are supposed to hold your finger in the middle till it asks for the next step. IF it wont go to this, then can you retry the whole process over again. If not you have bricked it and it has to be sent in for reflash

Jensen Car Audio... | Answered on Nov 10, 2020

2 Answers

Does the Jensen UV 10 stereo have internal fuses that can be replaced

In the back of the set you should find a small 'spade' type fuse, replace with Fuse: 15-amp, mini ATM type

There is a fuse holder in on the yellow wire on the wiring harness, pull out the unit and replace fuse.

User manual: http://www.jensenmobile.com/docs/common/UV10/UV10_OM.pdf

Wiring diagram http://www.manualslib.com/manual/674477/Jensen-Uv10.html?page=4#manual

Good luck.

Jensen Car Audio... | Answered on Aug 06, 2020

6 Answers

How to bypass jensen

I just purchased the VX7020 and went to Settings-Language-typed in 5,4,3,2,1,0 but the menu never came up. Any ideas?

Jensen Car Audio... | Answered on May 20, 2020

1 Answer

Jensen eqa-110 speaker wiring?

This info is on the bottom of it.

Jensen Car Audio... | Answered on Mar 15, 2020

1 Answer

Hi, I have a Jensen JCD 233u car radio, I've tried to connect the power on it but I fail, these only four power wires behind, ground, auto antena, memory and 12 volt positive wire, Please help how can I connect it ?

Ground - negative
12v positive - switchable positive (for example, on when ignition is on, usually connected to accessory side on ignition switch)
auto ant - connected to your electric antenna or to turn on external amplifier.
Memory - connected to always on positive (to keep all your stereo presets )

Jensen Car Audio... | Answered on Feb 11, 2020

1 Answer