Top 20 HP OfficeJet 4255 All-In-One InkJet Printer Questions & Answers

First thing you need to do is remove the device from the device manager. Uninstall the printer, then reboot the computer and you use that first CD that you listed.

They are not designed to fit in the wrong place so you must have forced it in. Well, now you are gonna have to force it out - try duplicating the way you inserted it in the opposite to remove it. If you pushed there to get it in, pull there to get it out. You might trash the printer but what choice do you have - it is stuck and you gotta get it out. Worst case scenario is that you seriously damage the cartridge tray and that can be replaced. But just what HP might charge you for the part is another matter.

You didn't describe your operating environment so difficult to get specific. I found this HP document for possible fixes to 49.xxxx errors: http://h30499.www3.hp.com/hpeb/attachments/hpeb/itrc-219/44130/1/280425.doc

From here http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=351125

Sir/Madam I Think Your HP Printer 6700 Pro Cartridges Is Not Properly Inserted, I Suggest You Watched This Video To Fix Your Hp Printer Problems, Url:- http://www.youtube.com/watch?v=nV59MGyoIcQ Or HP Printer Support

Visit http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&product=351125 to make sure you have the latest drivers installed for your system.

download your driver from here http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=351125 hope that it helped

There should be a few manuals on this site, check it and go trough your officejets troubleshooter: http://downloadfreemanuals.com/category/hewlett-packard-manuals/

You may download the HP driver from http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=351125&

You may download the driver from here.

about cable is not connected to the motherboard

Check for ink low warnings or refill cartridges..

from the user manual:The default fax confirmation setting is Every Error. This means that yourHP Officejet prints a report only if there is a problem with sending or receiving a fax. A confirmation message indicating whether an item was successfully sent appears briefly on the front panel display after each transaction. To have a confirmation printed for every fax, follow these instructions.1 Press Setup.2 Press 1, then press 1.This selects Print Report and then selects Automatic Reports Setup.3 Press direction right button until Every Fax appears in the second line of the display, and then press OK.The HP Officejet will print a confirmation report every time you send a fax informing you whether the fax was sent successfully or not.EnjoyChristopher

The suggested solutions were close...1. Press Setup.2. Press 3 to select Basic Fax Setup.3. Press 6 to select Ring Volume.3. Press > to scroll through the options: Low, Med, or High.4. Press OK to select the desired option.I'm not sure what the second part of your problem is.

You can try to download a application call Driver pack solution, very helpful with installing drivers after reinstalling windows, that app content drivers for all windows for almost all devices. The newest version you can find on: http://drp.su/download.htm

On panel press setup key>scroll to fax functions with the help of arrow buttons,enter > reports,enter >error report enter>make it on.. If you want sending report or received report just go to that, make it on...Note that every report you will loose one page as well as consuming of expensive ink.. Instead of this you can choose polling report, it will give you entire report includes sending,receiving & error...reports..

Select print in grey scales only in printer properties while shooting the print command, printer is using color cartridge instead of mono cartridge..

Image is expanding horizontally?,, check paper driving rollers, clean it with wet cloth, replace if required..

Scanner unit called as scan head detection failed by formatter, replace scan head, lift control panel to viable it..