20 Most Recent HP Color LaserJet 2600n Printer - Page 7 Questions & Answers

You have to buy the complete transfer belt assembly. I used to buy mine from express terminals but haven't used them for a few years, I would buy oem a lot cheaper and work just as good.

Do you mean the left margin is too large so all the content is shifted to the right and off the page? If this is the case, it is probably a setting in Pagemaker. In the file menu, choose "page setup" or "print setup". Check the paper size. Check the margins.

first check you have logged in with admin permission.

take one demo page from the printer menu. if the printout is also in black your printer need to be serviced .

you have something blocking the laser. if you remove the cartridge, look behind where it sits and you'll see a small line of glass going across. here you'll find its either covered in toner at the side your missing print or there is a ripped piece of paper. clean with a clean cloth or air duster

dirty scanner.open the printer back cover.remove the scanner assembly clean it ,do the color calibration.u should be fine.

Amuna1

when the cartridges are still locked after the front cabinet is released(opened) usually means the cart lock lift cam is broken- common fault on this machine- although the part is not much to buy the availability is what your main problem will be,good luck

Charge it?

check supply status, configuration page, how is look if black only getting miss alignment then check formatted board/dc controller

Hi , open printer que click cancel printing and then click refresh .wait few second printer will stop printing.

Here's a PDF file on how to fix weak magenta color due to dirty mirrors on the 2600N.... the PDF shows in detail how to disassemble the printer to access the mirrors and how to clean them...

the PDF file is in the second post (Razmat)... click the "attachment" button

Good luck

Open the front cover just enough to look at the black cartridge. If you open too much the cartridge flap will close. Look at the drum in the black cartridge. If there is a black mark on it, replace the cartridge

most likely the cotton you used is the problem.
take out the ink cartridge and see of there are any cotton stuck to the ink cartridge and the cradle.
use a coffee filter with some alcohol and clean the cradle and the ink cartridge contact. (lightly).

INSTALLING A NETWORK PRINTER These instructions generally apply to all network printers with built-in network cards (print servers) such as HP LaserJet printers, IBM Infoprint laser printers etc. This example is for a network HP LaserJet printer. To install a HP printer (with built-in Jetdirect print server) as a network printer on a wireless network . You need to do the following - 1. Open the printer\'s menu and enable the Network Card - these print servers use a static IP address therefore, configure the IP address of the network card so it matches the IP range of your network. Eg. If your IP\'s are 192.168.0.xxx then set the network card to a high number say 100. (This is to prevent a conflict with the router issuing the same IP address to a computer on your network). Then set the Subnet Mask IP address to 255.255.255.0 If you have a wireless router then check the IP address range that the router issues to the computers on your network and configure the static IP address in the printer\'s network configuration accordingly. 2. Install the HP printer driver on your computer/s using the LPT printer port. 3. Connect the printer with a LAN cable to the network hub/router. 4. Click on Printers and Faxes - right click on the HP printer and click on Properties. 5. Click on Ports and click on Add Port. 6. In available ports - click on Standard TCP/IP Port and then Configure port. 7. Tick the IP box and type in the IP address of the HP\'s printer IP address. 8. Click OK and tick Enable bi-directional support and then OK 9. Remove the printer cable, then do a test print to see if the printer prints correctly. Install the HP printer driver on every computer on your network and configure the printer\'s TCP/IP port as previously detailed. Do a test print page to check the printer. You can now print from any computer on your network.