20 Most Recent
NetGear Universal WiFi Range Extender Network Adapter - Page 9 Questions & Answers
WiFi not working for router
If you can see the SSID for the router from a WiFi device then it sounds like a security key issue. While connected through a cable login to the router. You should be able to trouble shoot the WiFi service from the router UI.
3/11/2015 9:06:54 PM •
NetGear...
•
Answered
on Mar 11, 2015
I have Cameras in my Restaurant, with a Buffalo Router i used to just Login to it woth the same address, NETGEAR chooses a New IP address each time, and even when i type the adress to the cameras,
I don't know Buffalo routers in particular, but it should be possible to assign fixed IP to specific network devices.
You stumble over a feature called DHCP that causes network devices to get random IP from a given range. To be clear on this: DHCP randomness is not a fault at all.
Look for "static IP adress" or "fixed adress" in your Buffalo router. It should be in or near the DHCP dialog. Maybe you have to enable expert mode.
In case you found that you can most likely assign IP's like 192.168.x.x (x-es depending on your network) to devices identified by MAC-Address.
MAC Address has nothing to do with Apple Computers. It's a worldwide unique network hardware address. Each of your cameras has one and your router usually displays them somewhere in a list of known network devices. They look like 00:0C:29:9B:AD:B7 or 00-0C-29-9B-AD-B7.
Assign the IP-Addresses you are used to and the cameras should be accessible at their address as soon as you rebooted them once (power off/on).
P.S. There is so much more to know about networking which i can't generalize here. Don't be ashamed to ask someone near to come over and help you set this up. Better than accidentally messing things up.
3/10/2015 8:17:19 AM •
NetGear...
•
Answered
on Mar 10, 2015
Http www routerlogin net
The security code is wrong, check on the back of the router for a label saying what it should be.
3/9/2015 5:03:49 PM •
NetGear...
•
Answered
on Mar 09, 2015
Frontier Modem Router
You need to set up the Wi-Fi on both the router and the PC.
It will default to the Ethernet connection, so don't forget to remove the cable if testing for wireless mode.
3/9/2015 5:02:39 PM •
NetGear...
•
Answered
on Mar 09, 2015
Netgear n 300 wnr2000v3
If the internet comes into the router, and not the DVD player, then the reason it keeps rebooting is that the internet link is going down.
3/9/2015 5:00:51 PM •
NetGear...
•
Answered
on Mar 09, 2015
Netgear cg3000d
Check the protocol used by the router and that used by the wireless adaptor. They should be the same, one may not be possible on the other.
3/9/2015 11:25:36 AM •
NetGear...
•
Answered
on Mar 09, 2015
NETGEAR 20
You need to ask Lenovo support why it does this, as it is not normal.
Are you sure it is not asking for the password number?
This you need to get from the router as it depends on the protocol used. If it is your router you should already have the password.
3/9/2015 10:15:37 AM •
NetGear...
•
Answered
on Mar 09, 2015
Netgear d6300 won't find a wireless canon ip7250
If the printer is connected via wireless it may not be set up correctly, as a network printer.
Connect it up via a USB cable to make sure it works, then change it to Wireless configuration and re-install it as a network not a USB printer.
3/9/2015 10:05:15 AM •
NetGear...
•
Answered
on Mar 09, 2015
Huawei driver
It is not compatible with a netgear router because they do the same job, one on broadband and one on 3G HSPA.
Two routers do not connect to each other.
3/8/2015 8:39:29 PM •
NetGear...
•
Answered
on Mar 08, 2015
Not finding what you are looking for?