Olympus P-440 Thermal Photo Printer - Answered Questions & Fixed issues

Helped over 100,000 people on Fixya and never got paid Fixya are crooks.

Remove the paper Cassette. Open the front cover to see where is paper is jammed. Clear the paper path and close the cover http://www.olympusamerica.com/files/oima_cckb/p-440_reference_manual_en.pdf

The first thing that you need to do is to verify if your Olympus P-440 is if it's supported by Mac OSX 10.6.x (Snow Leopard). If yes, make sure that you've installed the correct driver for Snow Leopard.

You may check the link below:

http://driverscollection.com/?file_cid=41942227668e7c7e22782bc2081

This link contains a driver for Mac OSX. I assume that this driver will work with all OSX (starting from Tiger to Snow Leopard). If this driver will not help, you may need to contact the manufacturer, and verify the system requirements of your printer.

Thank you and good luck!

hello, have you cleaned the thermal printhead, use isopropyl alcohol, and a soft cloth

Talked to the dudes at Olympus...won't work on a 64bit. Im in the same boat :(

If the printer does not pick up paper ...
Take a paper towel and clean the two rubber pick-up rollers (grey color) with rubbing alcohol.

You can see the tow rollers when you look down (from the top) in the slot where the paper tray goes.

your printer catridge has been faulty.so pls replace it.

I finally had time to sit and get my Olympus P-400 to work on Vista. I am using Vista 32 bit Service Pack 1.

Good thing I did this as I almost sold it!

Here's what you do: I created a new file folder on the Desktop to make this a little easier.

Using the original disk browse to the Acroread file folder, than to your specific language file and Copy the file ar405eng.exe to your Desktop in your new folder. The "eng" is for English.

Right mouse click the ar405eng.exe and select Properties.
Than select the Compatibility Tab.
Select Compatibility Mode and select "Windows 98/ME"
Also select "Run this program as an Administrator"

When I ran it it coped the .inf and DLL files to their own file. Do a search and locate files starting with "Olympus".

Got to Control Panel
Go to Printers
Click Add Printer
Choose Local Printer
Choose Have a Disk
Browse to the location where the .inf and DLL files are located when you did the search.
This installed the correct driver and I was able to print using Photoshop without error.

Hope this helps!!!!!!!!!!!!!!

The driver for the P-440 printer will work in Windows Vista. To install it you will need to run it in Windows compatibility mode XP service pack 2. Download the P-440 driver to your desktop from the olympusamerica.com website. Open the zip file, right click the mouse on the setup.exe file then left click on Properties. There will be a compatibility tab there. Select XP Service pack 2 and then click Ok. Connect the printer and as it goes through the found new hardware wizard direct to the folder location on your desktop for the files it needs to load the device driver.

Remove the jammed paper. Unplug the printer from the mains and PC. Inspect the rollers, etc for tiny paper piece(s) that may be stuck, or other debris. Try to clean rollers and make sure they are dry.
Keep printer unplugged for about 2 minutes and replug and try a test print.
Also make sure thatyou have waited long enough for the printer to heat up before giving a print job.
Finally, it could be an issue with the paper sensor. If this is the case, you will probably have to take the printer in for servicing..

Hope that helps!

well..good morning...what 'card' are you referring to on this, please?

Hi,
Click here for the windows drivers.
http://www.olympusamerica.com/cpg_section/software_results.asp?id=950&os=w

and then read this article about compatibility with your windows 7 system.
please note that your photo printer is not compatible with 64 bit systems.


Good luck.

After looking at the manufacturer's website I can see that the printer is only supported through XP. Do not despair however! You can still run the printer through a virtual machine using Windows XP Mode. A great tutorial is put out by Microsoft that explains how to use this feature in Windows 7. You can find it here:

http://windows.microsoft.com/en-US/windows7/install-and-use-windows-xp-mode-in-windows-7

I hope this helps! If it does, please give it a thumbs up!

I don't think you will find this information widely available. Suggest you try signing up for OlympusConnect.com web portal, you will then be able to access product manuals and access technical assistance:

https://www.olympusconnect.com/es_UserRegistration.asp?intCmp=msg_supportnav_olympusconnect

Trust this is helpul.

english only please

Open the picture you want to print in your favorite image editing or picture organizing software and click the printer icon in it's toolbar or go to File->Print. If your printer is properly setup the picture should print.

have you checked the flow of the ink...

there may be some particles or dust blocking the way of the ink flow

200 ml is about 6.76 US ounces or about 7.04 UK ounces.

'Make model (what it is)' is needed in questions like this, and in fact ALL questions!! But we can just guess.

Error Code Ir 3300 e350-3000 and e350-00002

Copytechnet https://www.copytechnet.com > ... > Canon May 1, 2018 - Put ALL the original boards back in the machine. Go to service mode level 2 & perform E355 clear. If this fails your machine is scrap. CANON iR2200 Error code E000350-001 Jan 22, 2007 error code :E0003-0002 canon IR 2880i Feb 5, 2018 Canon IRA C5540I Code E000354-0002 Sep 23, 2021 E000350-3000 on IRC4580 Sep 25, 2017 More results from www.copytechnet.com

Canon iR Advance 4245 - E350-0002

PrintCopy .info https://printcopy.info > code=E350-0002 Canon iR Advance 4245 ; Code: E350-0002 ; Description: System error ; Remedy: Contact to the sales companies. ..

This link is the best I can come up with: How to fix E6 & E7 on Trojan treadmill solved!! (youtube.com)