20 Most Recent Panasonic TH-42PD50U 42 in. Plasma EDTV - Page 3 Questions & Answers

it depends of your connection available on both computer and plasma tv..

I think accroding to your model number this unit is plasma.
I need to know red light how many times flashing and correct model number

you need to go to menu and go to video and start all if it doesn't work

Try these charts...

No. They are different.

No. They are not compactable.

more than likely capacitors on the power supply board

The D board may need to be replaced. Check it closely and look for any burnt marks.

If the tuner in the set is bad connect to component or even composite inputs on the rear of the set and bypass the tuner built into the set.What are you using for signal and what makes you think the tuner in the set is bad?

I you please send me the manual to the following email address: lopez.david1024 @ gmail.com

If password is lost, there is nothing a user can do, other than contact the authorized service center for Panasonic, especially to this PDP model.

Y -SUS or panel have to be suspected.

Visit the site named 'Electro-help' for more details. Click this link. View it in 'Flip card' option, which can be selected from the drop down box menu by the [Sidebar] tag, at the top left corner of the display window. It will make search easy. There are more than 900 posts to different brand TVs now.

Try it with an VGA to RCA connector wire.

Pin 93 of the MPU IC9003 monitors the status of the SC, SU, SD board. During normal operation, the photo-coupler PC6480 outputs a low to pin 93. If the SC, SU, or SD board becomes defective, a high is provided to pin 93. As a result, the unit shuts down and the power LED blinks 7 times.

Ditto for Jan 13th with a Panasonic 50"!

The problem is not the power supply, is with the tunner board voltage. change the P.A board fix the problem.