Panasonic TH - Recent Questions, Troubleshooting & Support
Help unlock child lock on tv
You need to have child lock code! Maybe has factory default Look manual. Sometimes factory reset overides child lock. Not sure about your model though.
PLEASE COMMENT, I'M INTERSTED TO KNOW
10/19/2020 5:36:15 AM •
on Oct 19, 2020
Plasma TV-power light does not come on
You have burned an internal fuse on the main power board. There are 2 right next to where the main power line plugs in ( after the noise filter ). Yes, you will have to unscrew the rear plate to get to it ( about 24 screws ). You just follow where the lead goes from the plug - you will see where the fuses are - right next to where the plug mounts to the power board. To check this set your meter to ohms and check for continuity - odds are one of the two fuses is done. THIS IS A PANASONIC SPECIFIC FUSE - it cannot be replaced with one that looks like it or fits the same slot. This fuse is a time-delay slow burn fuse and replacing it with anything other than the correct type will cause more damage and possibly total the unit. The panasonic part number is K5D802BNA005 and is available from several parts retailers - just google "panasonic part K5D802BNA005" and many reputable firms will come back on the search. They cost approx. $1.95 US ( so the shipping is probably 7.00 more ) Hope this helps and be careful of the internals and static electricity from your body.
4/11/2020 2:42:57 PM •
on Apr 11, 2020
Can't see full picture on TV
sounds like the dvd players set for differant picture format like full screen compared to wide screen settings. Look in the Menu of the tv as well as the dvd player
7/10/2019 8:01:52 PM •
on Jul 10, 2019
Why did picture go black??
IObit Driver Booster Pro Key
with latest Pro 5 setup is shared on this page for download. It is a very useful utility that every computer user must have. Did you know that all hardware components connected to your computer or laptop are powered by Drivers. These hardware components include your graphics cards, printers, USB ports and even keyboards. None of these components would work if you didn't have a driver installed for them.
11/19/2018 3:05:45 PM •
on Nov 19, 2018
Power light blinking 2 times
2 blinks means the unit is having problem with 12 volt supply.
while power on you can check 12DC on power supply before shutdown.if the voltage is constant before shut down I would recommend to replace D board.
6/17/2018 11:22:09 PM •
on Jun 17, 2018
Programming channels for TV viewing?
You can often find the digital channel numbers for your local stations in a guide like http://www.titantv.com/
. Alternately, check if the local stations websites offer a link to their schedule. This will usually list the channel/channel digital identity. Another source for the digital channel numbers are the antenna choice/position/direction guides. Look at http://www.antennaweb.org
. Tvfool.com gives the direction and signal strength for all channel transmitters in your general area. Antennaweb.org is much more conservative and will only give the strongest stations in your area. That conservative list assumes an external antenna and clear path between the transmitter and your antenna.
In my area, the analog channel 7 became digital channel 7-1 . However, the channels 12 and 16 now transmit at 43-1 and 46-1 . However, after letting the TV do the auto-search, they are 12-1 and 16-1 when I type in the channel numbers on my remote.
I hope this helps. I might be able to provide a list of your local digital channels if you add a comment with your general location.
3/4/2018 7:27:20 AM •
on Mar 04, 2018
Not finding what you are looking for?