Gateway FX6803-35 (PTGBD02004) PC Desktop - Answered Questions & Fixed issues

0helpful
1answer

My loading is real slow most programs don't even load

What program and where did you download it from?Sounds like a virus to me. Run some scanners such as Malware Bytes
1/29/2013 7:17:49 AM • Gateway... • Answered on Jan 29, 2013 • 58 views
0helpful
1answer

I keep getting a message that the battery needs to be replaced. Where is it?

It is on the motherboard. Take the power cord off the unit and panel to access it. On the board is a small round battery which is about half an inch in diameter and silver (chrome plated) somewhere on the board. Usually a CR 2032. It is what powers the memory of the CPU. Cost is around $2.50
9/28/2012 6:24:55 AM • Gateway... • Answered on Sep 28, 2012 • 113 views
0helpful
1answer

Downloads are difficult to perfirorm.

IE is corrupted- the download program from it is gone. The only way to fix that is to reinstall Windows. It's simpler just to use another browser - Opera has a fully operational download manager in it.
1/23/2011 10:55:45 PM • Gateway... • Answered on Jan 23, 2011 • 42 views
0helpful
1answer

My computer continues to shut-down for no apparent reason while booting up. It will get to bios then abruptly shutdown. Please Help!!

Maybe something is defective from the factory? Can you bring it back and exchange it for another? Is it a desktop or a laptop? If it's a desktop, maybe remove a side panel and aim a small fan at the inside. Do you know how to start up your computer in safe mode? Maybe try starting it in safe mode and see if you can do a system restore, do you know what that is and how to do it? Google will explain it to you, but I'd suggest those steps.
3/21/2017 7:48:25 AM • Gateway Fx... • Answered on Mar 21, 2017 • 187 views
0helpful
1answer

How do I manually ejecting a disc from a gateway

press the button on the disc drawer and it opens
7/29/2014 12:14:43 AM • Gateway Fx... • Answered on Jul 29, 2014 • 57 views
0helpful
1answer

How do Imanually ejecting a disc from a gateway

There should be a small round hole on the door near the eject button. Using a straightened heavy paper-clip, insert straight into the hole. There is a lever inside that you will feel, press in until the door comes partly open. Then you can pull the door to access the disk.
7/28/2014 7:51:07 PM • Gateway Fx... • Answered on Jul 28, 2014 • 76 views
0helpful
1answer

Manually ejecting a disc from a gateway

If there is a little pinhole by the eject button, unroll a paper clip and stick one end in it.
7/23/2014 10:23:01 PM • Gateway Fx... • Answered on Jul 23, 2014 • 60 views
0helpful
1answer

Restore gateway FX to factory settings

If your restore partition is intact, you can press F11 at boot, and follow the on-screen instructions to do a factory restore. Be sure to backup your data first, as it will be deleted in a Factory Restore.
7/16/2014 7:51:08 PM • Gateway Fx... • Answered on Jul 16, 2014 • 175 views
0helpful
1answer

Cd driver not opening

Open a paper clip and see if you can find a tiny hole in the front of the cd drive. Push the sraightened out paper clip into the hole and the drive should open without power on the computer. The hole on my dvd plyer is just above the switch which opens and closes the dvd drive. If the paper clip is too big you may have to go to a pc shop and buy a pin which comes with most new dvd players. If the owner of the shop is a nice person they may give you a pin and explain more.
1/18/2013 7:44:44 AM • Gateway Fx... • Answered on Jan 18, 2013 • 79 views
0helpful
1answer

How to removed a virus of the computer

Use your UP-TO-DATE AntiVirus and run a FULL SCAN. ALSO Download, install, RUN a FULL SCAN with MALWAREBYTES: http://www.filehippo.com/download_malwarebytes_anti_malware/ , UNCHECK the PRO TRIAL, you want the freeware version. If you cannot download , reboot to safe-mode with networking and download Malwarebytes and run your AntiVirus. Respond to post for furthwe assistance.
12/3/2012 5:37:43 PM • Gateway Fx... • Answered on Dec 03, 2012 • 178 views
0helpful
1answer

Searching for FX6801*03

What is fx6801-03?
6/3/2012 2:22:14 PM • Gateway Fx... • Answered on Jun 03, 2012 • 91 views
0helpful
1answer

Windows error 8000_4002

What were you doing when you got this error?
4/27/2012 7:23:17 AM • Gateway Fx... • Answered on Apr 27, 2012 • 39 views
0helpful
1answer

Windows error code 8000-4002

What were you doing to get this error? When is this happening?
4/27/2012 7:22:34 AM • Gateway Fx... • Answered on Apr 27, 2012 • 112 views
0helpful
1answer

Power suppy connections to computer

What is the question? When hooking up a power supply, there are only 2 plugs to hook up and there are only 2 places on the motherboard where they fit.
3/22/2012 4:55:20 PM • Gateway Fx... • Answered on Mar 22, 2012 • 32 views
0helpful
1answer

My gateway lt2016u crashed

Crashed How? What happened and what's it doing now?
3/19/2012 1:28:35 AM • Gateway Fx... • Answered on Mar 19, 2012 • 68 views
0helpful
1answer

I have a Gateway LP2417 monitor and there's No sound.Hoe do I fix it,so I can hear the video that is playing?

This monitor may not have built-in speakers. It may have supported Gateway's monitor mounted sound bar. That sound bar connected to the 3.5 mm audio out on a computer and a DIN port on the monitor. The simplest solution is to connect your source to appropriate speakers. Depending on your audio setup, you could connect the video source to a receiver with HDMI IN and HDMI Out (ARC), computer speakers or an audio extractor. (If you are using an HDMI cable between the Gateway LP2417 and a computer, you may need to reset the audio output to use basic computer speakers (3.5mm jack).) VGA and DVI connections don't support audio so I assume you are using the HDMI port. I hope this helps. Cindy Wells
1/18/2024 10:32:24 PM • Gateway... • Answered on Jan 18, 2024 • 31 views
0helpful
1answer

I have a gateway Zx4931 and the power button is not working. Do I need to replace the power button or can I reconnect the wires?

Re connecting the wires may work without issues.
12/26/2023 5:46:39 PM • Gateway... • Answered on Dec 26, 2023 • 23 views
0helpful
1answer

Do i need a driver for old gateway gmax2000 speakers connected to an old acer-based home built pc my nephew gave me?

No you don't need a driver. These are very plain powered speakers that come with a mains adapter and a lead with a 3.5mm stereo jack at both ends. Plug one in the speaker and the other into the headphone jack on the front or the speaker socket on the back which will either be a socket on the motherboard, or if your son put a sound card in the computer, it will be in a sound card. If it doesn't play straight away, go into Settings - Audio and make sure the sound card or the On-Board Audio is enabled. This shows the cable https://picclick.com/Vintage-Gateway-2000-ACS41-Altec-Lansing-Multimedia-Computer-314990339798.html#&gid=1&pid=1 More here https://www.google.com/search?q=gateway+gmax2000+speakers ..
11/29/2023 12:20:06 AM • Gateway... • Answered on Nov 29, 2023 • 32 views
0helpful
1answer

WATTS REQUIRED FOR GATEWAY LAPTOP NV55C

110 watts for the power supply.
11/21/2023 1:16:48 AM • Gateway... • Answered on Nov 21, 2023 • 96 views
Not finding what you are looking for?
Gateway FX6803-35 (PTGBD02004) PC Desktop Logo

Popular Tags

3 questions posted

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...