Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
...output is low and the stator has passed the static stator check then it is likely that the permanent magnets in the alternator rotor are weak. A permanent magnet can lose its magnetic strength if it ...
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
...stator output is an AC voltage that is rectified by the regulator turning it into a DC voltage to charge the battery. I am not familiar with the later model bikes with the Twin Cam engines. However. ...
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
...stator..output voltage should read between 100 acv mid revs to 150 acv mid revs output to battery should be 13.5v -14.75v dc...if not then regulator is RS ...I used to fit Honda regulators 30amp type ...
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
...output problem? how do you test and locate? thanks. when running at bat use good vom 14 + volts .good bat volts non running 12.6 v .if not check wire to reg ..check that reg is grounded GOOD , bat in ...
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
stator plug where the regulator wires plug into the engine cases in the front of the engine. Unplug the wires and look into the engine side of the plug. there will be two contacts. this is where we'll
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
...down, lowering output from the stator. Another cause could be the voltage regulator. Listen for any peculiar noised coming from the primary. Any knocking check it out ASAP as more damage will
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
...output of the alternator. Look down near the oil filter and find the connector on the engine case where your voltage regulator plugs in. Unplug the connector and inspect both ends of it for broken or ...
Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles
...shooting elect. sys. Already cked batt. voltage, and got no change when eng. off or running 12.7 volts. Just need stator output so I can eliminate stator or volt reg. PLZ HELP!!!!! I believe 14 ...
193 questions posted
Usually answered in minutes!
681 Questions
291 Questions
199 Questions
187 Questions
165 Questions