...remove the drum. ? Detach the drum horizontally. 8. Replace the drum and refit all the removed parts. ? When replacing the drum, insert a sheet of paper between the drum and developing roller to ...
...5. Open the left side cover and then remove the waste toner box. 6. Unlock the drum unit lock and then remove the drum unit. 7. Check or replace the drum unit and refit all the removed parts. Good ...
Question about Canon Office Equipment & Supplies
...cover and then remove the waste toner box. 3. Unlock the drum unit lock and then remove the drum unit. 4. Check or replace the drum unit and refit all the removed parts. I hope this is helpful, ...
Question about Canon Office Equipment & Supplies
...cover and then remove the waste toner box. 3. Unlock the drum unit lock and then remove the drum unit. 4. Check or replace the drum unit and refit all the removed parts. I hope this is helpful, ...
...drum unit take drum unit out remove drum lock towards the front remove charge assemby remove drum reinstall drum remember to apply drum powder and replacement of drum blade is recommended ...
...drum, then remove the drum unit. Note there is a corona wire as the primary charge, it is not a roller. There is a screw that holds the unit in on the rear of the drum unit and also, there is one ...
drum unit,remove the drum and def unit. The drum is attached by two clips on top of def unit,unlock the drum from the def by releasing that clips,slide te drum protecktion plate to the rear and remove
drum. 7. Remove the MCH assembley - 1 screw. 8. Remove the front separation claws + plate - 2 screws. 9. Remove the Drum Shaft 10. Replace the Drum There are few details about how to manipulate a Drum
remove the drum unit. If the printer is dirty inside, clean it with vaccum cleaner. Be carefull with the drum surface, not to scratch it. Put the Drum Unit into a dark place if you remove the unit for
751 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions