Question about Riccar Vacuums
...cleaner's headlight. If the headlight is on while the motor is off, then the thermal fuse protector did safely shut down the motor. If both the headlight and motor are off, then there is some reason ...
...cleaner would not take up any dirt out of my carpet. What may be the problem> likely a broken belt. turn vac over and see if roller turns free. if it does the belt is broken. turn the handle on front ...
...cleaner that sometimes trips if the bag is too full, or the filters are not maintained, but when this happens nothing on the vacuum comes on including the headlight. If the headlight is coming on, ...
Question about Hoover Vacuums
Doesn't seem to have much suction when I put my hand under the head. Have cleaned both the filter and the mesh screen Check the suction from the hose for rge tools see if there is suction also check ...
...headlight is on if you hit the starter swictch just right it will start just for a few seconds and then it will get no fire to the plug.checked fuel filter not cloged no black smoke it has something ...
...cleaner. First, before taking apart the power nozzle to change the belt, try pressing the overload protection system reset switch. This overload protection feature is designed to shut off the power ...
...headlight - use a flathead screwdriver to pop it off.....then the belt connects from the agitator to the motor pulley. Phew! This site shows the installation with photos: ...
Question about Electrolux Vacuums
el7020a beater brush wont run... no headlights. vacuum OKAY I used a blunt blade putty knife to push in the rear clips... while forcing the cover up. These clips are every bit as stong as auto door ...
...CLEANER. You need to disengage the carpet head from the vac itself. Do this by lifting the headlight and rotating the thumb lock underneath. Then release the carpet head by turning the square dial ...
65 questions posted
Usually answered in minutes!
100 Questions
4 Questions